As a matter of fact, while we have abundant simple illustrations of
the principles which we have now begun to study, apparent exceptions
to this simplicity, due to an asymmetry of the cell itself, or of the
system of which the single cell is but a part, are by no means rare.
For example, we know that in cambium-cells, division frequently takes
place parallel to the long axis of the cell, when a partition of much
less area would suffice if it were set cross-ways: and it is only
when a considerable disproportion has been set up between the length
and breadth of the cell, that the balance is in part redressed by the
appearance of a transverse partition. It was owing to such exceptions
that Berthold was led to qualify and even to depreciate the importance
of the law of minimal areas as a factor in cell-division, after he
himself had done so much to demonstrate and elucidate it[390]. He was
deeply and rightly impressed by the fact that other forces besides
surface {358} tension, both external and internal to the cell, play
their part in the determination of its partitions, and that the
answer to our problem is not to be given in a word. How fundamentally
important it is, however, in spite of all conflicting tendencies and
apparent exceptions, we shall see better and better as we proceed.
――――――――――
But let us leave the exceptions and return to a consideration of the
simpler and more general phenomena. And in so doing, let us leave the
case of the cubical, quadrangular or cylindrical cell, and examine the
case of a spherical cell and of its successive divisions, or the still
simpler case of a circular, discoidal cell.
When we attempt to investigate mathematically the position and form
of a partition of minimal area, it is plain that we shall be dealing
with comparatively simple cases wherever even one dimension of the
cell is much less than the other two. Where two dimensions are small
compared with the third, as in a thin cylindrical filament like that
of Spirogyra, we have the problem at its simplest; for it is at once
obvious, then, that the partition must lie transversely to the long
axis of the thread. But even where one dimension only is relatively
small, as for instance in a flattened plate, our problem is so far
simplified that we see at once that the partition cannot be parallel to
the extended plane, but must cut the cell, somehow, at right angles to
that plane. In short, the problem of dividing a much flattened solid
becomes identical with that of dividing a simple _surface_ of the same
form.
There are a number of small Algae, growing in the form of small
flattened discs, consisting (for a time at any rate) of but a single
layer of cells, which, as Berthold shewed, exemplify this comparatively
simple problem; and we shall find presently that it is also admirably
illustrated in the cell-divisions which occur in the egg of a frog or
a sea-urchin, when the egg for the sake of experiment is flattened out
under artificial pressure.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account