The cloth was crafted by local weavers, dyers, and fullers. The weaver lived in a cottage with few and narrow windows and little furniture. He worked in the main, and sometimes the only, room. First the raw wool was washed with water at the front door to remove the grease. Then its fibers were disentangled and made fine with hand cards with thistle teeth, usually by the children. Then it was spun by a spinning wheel into thread, usually by the wife. On a double frame loom, a set of parallel threads was strung lengthwise. A device worked by a pedal lifted half of these threads --every other thread--while the other half remained in place. Between the lifted threads and the stationary threads a shuttle was thrown by the weaver from one hand to another. Then the threads which had remained stationary were raised by a second pedal and the shuttle thrown back. The shuttle carried a spool so that, as it moved, it left a thread behind it running crosswise or at right angles to the lengthwise threads and in and out between them. The lengthwise threads were called the "warp"; the shuttle thread was the "woof" or the "weft".In making cloth, it was the warp which, as the loom moved, took the worst beating. With the constant raising and lowering, these treads would wear and break, whereas the weft on which there was little strain remained intact. None of the cotton yarn which the old-fashioned wheels had spun was strong enough for warp. So it was necessary to use linen thread for the warp.