In the case of very light, sandy, and porous soils, the wooden box may be at once inverted over the soil and forced down by pressure, and then dug out. Proceed in the same way for collecting the samples from all the selected places in the field, taking care that the subsoil is not mixed with the surface soil. The former should be sampled separately. In preparing the plot for the gathering of the sample, take care to have it lightly scraped so as to remove any débris which may be accidentally found there. The different samples thus procured are emptied on a clean, boarded surface, and thoroughly mixed, so as to incorporate the different samples of the same field together. The heap is then divided into four divisions, and the opposite quarters are put aside, taking care to leave the two remaining ones undisturbed; these are thoroughly mixed together, the heap divided into quarters, and the opposite ones taken away as before. This operation of mixing, dividing into quarters and taking away the opposite quarter is continued until a sample is left weighing about ten or twelve pounds. Thus is obtained the average sample of the soil. Of course where only a single sample is taken from the field this method of quartering is not resorted to, but the bottom of the box is nailed directly on and sent to the laboratory, where the soil is to be analyzed. =69. Grandeau=[51] suggests that in taking soil samples there are two cases to be considered; first a homogeneous soil and second, a soil variable in its appearance and composition. First, if the soil is homogeneous, being of the same geologic formation it will be sufficient to take a mean sample in accordance with the following directions: The field is first divided by diagonals or by transverse lines the direction of which need not be fixed in advance but as inspection of the form and configuration of the field may indicate. In the ordinary conditions, of homogeniety (marly, granite, argillaceous or silicious soils) it will be sufficient to select about five points per hectare from which the samples are to be taken. These points having been determined the surface is cleaned in such a way as to remove from it the detritus which may accidentally cover it; such as dry leaves, fragments of wood, foreign bodies, etc. The surface having been prepared, (five to six square meters) a hole is dug four-tenths of a meter long and as wide as the spade employed. The sides should be as nearly vertical as possible. As to depth it varies with the usage of the country in regard to tillage. The layer of arable earth is what in effect properly constitutes the soil. It ought not to be mixed with any fragments of the subsoil. When the hole is properly cleaned the samples are secured with a spade from the sides of the excavations. About five kilograms are taken. The soil is placed in a proper receptacle as it is removed from the hole.