or two in the flame of an alcohol or other convenient lamp. The sample
tube having been removed from its sack, it will be noted that the end
covered with black rubber is the one which is to be held in the hand,
and this black rubber cap should be first removed being careful not
to extract the plug of sterilized cotton which closes the end of the
tube. Holding the tube firmly by the end, the fingers extending only
about two inches from the end, remove the light-colored cap and push
the tube with a turning motion into the side of the pit at the point
where the surface has been removed with the sterilized spatula. When
this is properly done the tube will be filled with a cylinder of soil
equal to the length of the part of the tube penetrating the wall of the
pit. The tube is then withdrawn, the light rubber cap first replaced,
and then the black one. The light rubber cap should be held in the hand
during the process in such a way that no dust or particles of soil are
permitted to contaminate its inner walls. For this purpose the open
end of the cap should be held downward. For the same reason after the
removal of the light rubber cap the brass tube should be carefully
preserved from dust or fragments, the open end, that is the cutting
end, being held downward until ready for use. After one tube has been
filled, capped, replaced in the sack and labeled, the spatula should be
again sterilized and samples taken in regular order until the top one
is finished.
=220. Directions for Taking Bulk Samples.=—From the sides of the pit
described above, bulk samples should be taken as follows:
By means of a spade the soil should be removed from the four sides to
the depth of six or nine inches or until the change of color between
the soil and subsoil is noted; in all enough to make about 150 pounds
of the air-dried soil. In the same way take a sample of the subsoil to
the depth of nine additional inches. Remove all stones, large pebbles,
sticks, roots, etc., and spread the samples in a sheltered place where
they can be air-dried as rapidly as possible. The bulk samples should
be taken both from the cultivated and virgin soils. In selecting the
cultivated soil, preference should be given to those soils which have
not been fertilized within a few years. If recent fertilization have
been practiced the character and amount of it should be noted.
=221. The Nitrifiable Solution.=—The solution to test the nitrifying
power of the samples collected as above described is conveniently made
as follows:
Potassium phosphate, one gram per liter.
Magnesium sulfate, half a gram per liter.
Calcium chlorid, a trace.
Ammonium sulfate, 200 milligrams of nitrogen per liter.
Calcium carbonate, in excess.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account