=117. Volumetric Method used in this Laboratory.=—The alkaline copper
solution preferred in this laboratory has the composition proposed by
Violette. The copper sulfate and alkaline tartrate solutions are kept
in separate vessels and mixed in proper proportions immediately before
use, and diluted with about three volumes of water. The reduction is
accomplished in a long test tube at least twenty-five centimeters in
length, and from thirty-five to forty millimeters in diameter.
The sugar solution employed should contain approximately one per cent
of reducing sugar. If it should have a greater content it should be
reduced with water to approximately the one named. If it have a less
content, it should be evaporated in a vacuum at a low temperature
until it reaches the strength mentioned above. A preliminary test
will indicate almost the exact quantity of the sugar solution to be
added to secure a complete reduction of the copper. This having been
determined the whole quantity should be added at once to the boiling
copper solution, the test tube held in the open flame of a lamp
giving a large circular flame and the contents of the tube kept in
brisk ebullition for just two minutes. The lamp is withdrawn and the
precipitated suboxid allowed to settle. If a distinct blue color remain
an additional quantity of the sugar solution is added and again boiled
for two minutes. When the blue coloration is no longer distinct, the
presence or absence of copper is determined by aspirating a drop or
two of the hot solution with the apparatus described below. This clear
filtered liquor is then brought into contact with a drop of potassium
ferrocyanid solution acidulated with acetic. The production of a brown
precipitate or color indicates that some copper is still present,
in which case an additional quantity of the sugar solution is added
and the operation continued as described above until after the last
addition of sugar solution no coloration is produced.
=118. The Filtering Tube.=—The filtering tube used in the above
operation is made of a long piece of narrow glass tubing with thick
walls. The length of the tube should be from forty to forty-five
centimeters. One end of the tube being softened in the flame is pressed
against a block of wood so as to form a flange. Over this flange is
tied a piece of fine linen.[82]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account