Radiation Thickness of Relative Aluminium in cms. power of which cuts off half penetration the radiation α rays 0·0005 cms. 1 β „ 0·05 cms. 100 γ „ 8 cms. 10000 The relative power of penetration is thus approximately inversely proportional to the relative ionization. These numbers, however, only indicate the order of relative penetrating power. This power varies considerably for the different active bodies. The α rays from uranium and polonium are the least penetrating, and those from thorium the most. The β radiations from thorium and radium are very complex, and consist of rays widely different in penetrating power. Some of the β rays from these substances are much less and others much more penetrating than those from uranium, which gives out fairly homogeneous rays. =74. Difficulties of comparative measurements.= It is difficult to make quantitative or even qualitative measurements of the relative intensity of the three types of rays from active substances. The three general methods employed depend upon the action of the rays in ionizing the gas, in acting on a photographic plate, and in causing phosphorescent or fluorescent effects in certain substances. In each of these methods the fraction of the rays which is absorbed and transformed into another form of energy is different for each type of ray. Even when one specific kind of ray is under observation, comparative measurements are rendered difficult by the complexity of that type of rays. For example, the β rays from radium consist of negatively charged particles projected with a wide range of velocity, and, in consequence, they are absorbed in different amounts in passing through a definite thickness of matter. In each case, only a fraction of the energy absorbed is transformed into the particular type of energy, whether ionic, chemical, or luminous, which serves as a means of measurement.