1. =Preliminary Remarks.=--When a stream is trained or regularised it is generally made narrower, but sometimes narrow places have to be widened. Deepening has also very frequently to be effected. The object of training is generally the improvement of navigation, but it may be the prevention of silt deposit. Some natural arms of rivers which form the head reaches of canals in the Punjab are wide and tortuous, and they are sometimes trained. Training often includes straightening or the cutting-off of bends, as to which reference may be made to CHAP. VII. 2. =Dredging and Excavating.=--When a flowing stream is to be deepened, the work is usually done by dredgers. Dredgers can remove mud, sand, clay, boulders, or broken pieces of rock. The “bucket ladder” dredger is the commonest type. The “dipper” dredger is another. Both these can work in depths of water ranging up to 35 feet. The “grab bucket” dredger can work up to any depth and in a confined space. The “suction dredger” drawls up mud or sand mixed with water. A dredger may be fitted with a hopper or movable bottom, by means of which it can discharge the dredged material--this, however, involves cessation of work while the dredger makes a journey to the place where the material is to be deposited--or it can discharge into hopper barges or directly on to the shore by means of long shoots. For small works in comparatively shallow water the “bag and spoon” dredger, worked by two men, can be used. When rock has to be removed under water it is blasted or broken up by the blows of heavy rams provided with steel-pointed cutters. In widening a channel the excavation can be carried down in the ordinary way to below the water-level, a narrow piece of earth, like a wall, being left to keep the water out. If the channel cannot be laid dry, the work can be finished by dredging. Regarding methods by which the stream is itself made to deepen or widen its channel, reference may be made to CHAP. V.