French Cream, for restoring the Lustre of Furniture, 2s. 6d. per Bottle. _Superior Furniture Oil for Dining Table Tops_, _&c._ POLISH AND VARNISH OF EVERY DESCRIPTION WHOLESALE AND RETAIL. CONTRACTS TAKEN FOR BUILDERS’ & DECORATORS’ WORK, ETC. _Experienced Workmen sent to all parts of the Kingdom on the_ _Shortest Notice_. * * * * * BY ROYAL LETTERS PATENT. [Picture: Sawing machine] Awarded the SILVER MEDAL at the NORFOLK AGRICULTURAL SHOW at Norwich. SPARKE AND CO., ENGINEERS, THORN LANE FOUNDRY, NORWICH, Invite the attention of Agriculturists, Shippers, Contractors, and others, to their PATENT SELF-ACTING CIRCULAR SAW BENCHES. These Benches are fitted with a New Apparatus for drawing timber to and from the Saw, so simple that it can be managed and the speed instantly regulated. They are also fitted with a draft chain, perfectly free in the delivery, which can only draw parallel to the saw. They are adapted to cut any description of wood; rough timber merely requiring to have each end chipped with an axe, to give it a steady bearing on the table and carriage. The carriages are fitted with a lever roll, to enable the man who works the bench to raise the timber on the carriages to carry it beyond the saw; they are also fitted with an improved gauge, to cut either parallel or feather edge boards; for deal cutting a spring roll is sent to press the deals against the gauge, so that a true cut is obtained, however uneven the surface and with as little waste as the common pit saw. Any of these benches may be worked by power from 4-horse upwards, as the speed for bringing the timber to and from the saw is regulated according to the power used, they are also fitted with a lever so as to stop or reverse the motion of the timber instantaneously (a necessary precaution in case of accident); they are suitable for cutting timber on estates, for timber merchants, contractors, or builders’ purposes, as timber of any length and depth, according to the diameter of the saw, may be cut perfectly true. (_See next Page_.) * * * * * BY ROYAL LETTERS PATENT [Picture: Sparke & Co.’s vertical saw mill] SPARKE & CO.’S VERTICAL SAW MILL. These Mills are very strong, fitted with 6 saws, and are made to cut two deals at one time; the Saws are worked by a simple motion which considerably lessens the working parts of the mill, and adds to its compactness; it can be readily fixed, as the mill is firmly bolted to a metal base plate. They are made in two sizes, for cutting 18 inches and 12 inches deep. A smaller mill on the above principle, for cutting felloes and curves. ~~~~~~~~~~~~~~~~~~~~~~