The very singular and simple hydraulic motor which we illustrate herewith is the invention of a Russian engineer, Mr. Jagn. It is scarcely as yet known in Western Europe, where, however, something will probably be heard of it ere long. Its true field would seem to be Egypt, India, or any country where canals or rivers are used for irrigation, and where it is desired to draw water from them at particular spots in the simplest and cheapest manner. At present in nearly all such cases water is raised by hand or steam power; nevertheless it must be obvious that the current of the canal itself, slow though it may be, is quite sufficient to raise a small portion of the discharge to the very moderate height generally needed to lift it over the banks into the adjoining fields. Why then is it not employed for the purpose? The answer is obvious, when we consider the various hydraulic motors at present in use. Of course, motors worked by water pressure must here be excluded; and we are left with scarcely anything but the undershot wheel, the turbine, and the screw pump. All these require expensive buildings and erections to set them to work, present but a very small fraction of their surface to the water at any one time, and must be very large and costly if they are to draw even a very moderate amount of power from such a source. There is no possibility of adjusting them readily to suit variations in the speed of the current or in the quantity of water required, nor of moving them from place to place should this be convenient. [Illustration: PARACHUTE HYDRAULIC MOTOR.]