George W. Akins, Bridgeton, Pa.--In this hive, holes are bored in the sides of the compartment for ventilation, and windows are flared for the purpose of inspecting the inside of the hive. A frame is used whenever it is desired to have the honeycomb of any particular shape. It consists of a form of tin or other suitable maternal, placed on a frame or slide, and having the shape required in the comb. Bees will build inside of the form, leaving about one fourth inch space between the form and the comb. The tin sheet receives a portion of the refuse matter, and can be readily taken out and cleaned. On the 1st of May the bees are driven out into another hive and the frames examined. Three frames are taken out and set in a new box, and three empty frames are put in their place. The old queen must be put with the new colony, and half of the bees must be put in each box and shut up, and put on a stand. The hives are to be opened the next morning. At the next natural swarming time the swarms can be again divided. The hive cannot freeze, and it is proof against mice. IMPROVED PLOW STOCK. Robert Weber, New Ulm, Texas.--In this invention, by loosening a nut, the point of draft attachment may be raised and lowered to cause the plow to work deeper or shallower in the ground, or turned to one or the other side, to cause the plow to take or leave land, and may be secured in place when adjusted by again tightening the nut. IMPROVED COMBINED HAY TEDDER AND SIDE RAKE. John Huber and Henry Snell, Girard, Ill.--This machine may be used simply for stirring up and turning the hay, or for turning the hay and gathering it into windrows. The shaft of a reel revolves in bearings attached to the side bars of the frame near their rear ends. To the bars of the reel are attached spring teeth, which, as the machine is drawn forward, take hold of the hay, carry it up and over the reel, and drop it to the ground in the rear of the machine. A carrier takes the hay from the teeth, when it has been brought to the top of the reel, carries it over the shaft, and discharges it into a trough, down which it slides, and is deposited in a windrow along one side of the path of the machine. IMPROVED GRUBBING MACHINE.