Sounding the Ocean of Air: Being Six Lectures Delivered Before the Lowell Institute of Boston, in December 1898Rotch, Abbott Lawrence
Science
Sounding the Ocean of Air: Being Six Lectures Delivered Before the Lowell Institute of Boston, in December 1898
Rotch, Abbott Lawrence
Atmosphere; Balloons; Clouds; Kites (Meteorology)
Perhaps the most important factor in the success of the Blue Hill work
was the invention by Mr. Clayton of the regulating bridle which is
applied to every kite. An elastic cord is inserted in the lower part
of the bridle, to which the flying-line is attached, and when the
wind-pressure increases this cord stretches, and causes the kite to
diminish its angle of incidence to the wind until the gust subsides. A
kite can be set to pull only a fixed amount in the strongest wind,
when the kite will fly nearly horizontal. We are therefore able to
calculate the greatest pull which can be exerted on the wire by all
the kites. With this device the kites have flown through gales of
fifty or sixty miles an hour without breaking loose or injuring
themselves. Another efficient kite which has been used at Blue Hill is
the so-called "aero-curve kite" made by Mr. C. H. Lamson of Portland,
Maine. As is seen from Fig. 11, this kite resembles a soaring bird,
and it can be taken apart and folded up for storage or transportation.
In general, the angle of the flying lines of the Blue Hill kites is
50∞ or 60∞ above the horizon, and in winds of twenty miles an hour the
pull on the line is about one pound for each square foot of lifting
surface in the kite. Kites can be raised in a wind that blows more
than twelve miles an hour at the ground, and as the average velocity
of the wind for the year on Blue Hill is eighteen miles an hour, the
days are few when kites will not fly there.
[Illustration: FIG. 11.--Lamson's Aero-curve Kite.]
The wire to which the kites are attached is steel music-wire, 32/1000
of an inch in diameter, weighing fifteen pounds a mile, and capable of
withstanding a pull of three hundred pounds. The wire is spliced in
lengths of more than a mile with the greatest care, special pains
being taken that no sharp bends or rust-spots occur which would cause
it to break. To lift the increasing weight of wire, kites are
attached at intervals of a few thousand feet, so that the angle may be
maintained as high as is consistent with a safe pull, and this is done
by screwing on the wire aluminium clamps, to which the kite-lines are
fastened. On account of the greater stability and strength of the new
kites, the meteorograph is suspended directly from the top kite. The
Richard meteorograph, contained in an aluminium cage of about a foot
cube, weighs less than three pounds, and it is only necessary to
screen the thermometer from the sun's rays to obtain the true
temperature of the air, since the wind insures a circulation of air
around the thermometer. Another meteorograph, constructed by Mr.
Fergusson, records the velocity of the wind in addition to the three
other elements, and it weighs no more than the French instrument.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account