If this percentage of acid equivalent is less than that found by titration report the difference as percentage of free acid. If the percentage of acid equivalent is greater than that found by titration the difference divided by 2.88 is the percentage equivalent to the excess of aluminium oxide present. Divide this excess by the percentage of total aluminium oxide and report the quotient as the basicity ratio. LIME. Mix well the sample, which should contain no lumps. If foreign matter is present grind the sample to pass a 100–mesh sieve. Place 20 grams of granulated cane sugar and 1 gram of the sample in a 250 cc. glass-stoppered bottle, tightly stopped, and mix the mass by rolling. Do not shake hard as much of the lime could thus be lost as dust. Then add 187.4 cc. of distilled water freshly boiled to expel carbon dioxide. This makes 200 cc. of sugar solution. The lime is mixed dry with the sugar and the water added later to keep the lime from lumping. After shaking the sugar solution one hour titrate 50 cc. of it with N/2 hydrochloric acid in presence of methyl orange indicator. The acid used is equivalent to the carbonate and hydroxide in 0.25 gram of the sample. Filter the remainder of the sugar solution, discarding the first 25 cc. of filtrate. Titrate 50 cc. of the filtrate with N/2 hydrochloric acid in presence of methyl orange indicator. The acid used is equivalent to the hydroxide in 0.25 gram of the sample. If a 1 gram sample is used the percentage of calcium oxide (CaO) is equal to 5.6 times the number of cubic centimeters of hydrochloric acid used in the second titration; and the percentage of calcium carbonate (CaCO_{3}) equivalent to the carbonate present is equal to 10 times the difference in cubic centimeters between the results of the two titrations. SULFATE OF IRON. INSOLUBLE MATTER. Treat 10 grams of the sample with 100 cc. of freshly boiled distilled water cooled to 30° C. or less. When solution is complete filter through a weighed Gooch crucible, wash, dry, cool, and weigh. Report the weight of the residue, in percentage, as insoluble matter. IRON AS FERROUS SULFATE. Dissolve 1 gram of the sample and dilute to 200 cc. with freshly boiled distilled water cooled to 30° C. or less. Add 5 cc. of dilute sulfuric acid (1 to 3) to a 50 cc. portion of the solution and titrate with N/10 potassium permanganate. The percentage of ferrous sulfate (FeSO_{4}.7H_{2}O) is equal to 11.12 times the number of cubic centimeters of potassium permanganate used. ACIDITY.