Steam-ships : $b The story of their development to the present dayFletcher, R. A.
History
Steam-ships : $b The story of their development to the present day
Fletcher, R. A.
Shipbuilding; Steamboats
The last three or four years have seen the advent of the largest
steamers afloat, and before the end of 1910 they will be eclipsed by
one of the two steamers, the _Olympic_ and the _Titanic_, now building
for the White Star Line by Harland and Wolff at Belfast, which are
to be of about 45,000 tons each. At present the largest White Star
vessel is the _Adriatic_, launched in September 1906 and placed upon
the service to New York in the spring of 1908. This gigantic ship is
709 feet 2 inches in length, 75 feet 6 inches beam, and 52 feet deep,
and her displacement is over 40,000 tons. Besides the usual luxurious
fittings of the vessel, which are all in accordance with the traditions
of the White Star Line--she is in this respect an improved version of
all her great predecessors--she has an electric passenger lift giving
communication between the various decks, a gymnasium, and a full set of
turkish baths besides plunge bath, massage couches, and electric baths.
The hull is divided into twelve water-tight compartments, the bulkheads
being fitted with doors which can all be closed instantaneously from
the bridge if desired, and there are no fewer than nine steel decks.
The Inman and International liners _City of New York_ and _City
of Paris_, steel twin-screw steamers, were launched in 1888 and
1889. These two steamers marked one of those epochs of complete
transformation in type of vessel necessitated by the public demands
and rendered possible by the advance of engineering science.[93]
They had considerable beam and their subdivision into water-tight
compartments was more thorough than in any vessel hitherto built.
Another innovation in their construction was the arrangement of fore
and aft bulkheads in addition to the transverse bulkheads. Both
these ships were of the Inman type with clipper bows and the usual
long graceful lines, but they spread less sail than any of their
predecessors, being fitted simply with three pole masts carrying fore
and aft schooner rig only. The funnels of each boat, which were three
in number, were placed between the fore and main masts. Each vessel
carried two separate engines built on the three-crank system, and the
boilers were constructed to work at the then unusual pressure of 150
lb. to the inch. The rudder was in many respects different from that
usually constructed for merchant steamers, and more nearly approximated
to the type adopted in the Navy, in which, as a protection against
hostile projectiles, the rudder is wholly submerged. This form of
rudder was introduced in these two steamships as they were intended to
be used as auxiliary cruisers. The rudder itself was constructed on a
modification of the balanced system, in which a portion of the rudder
is placed forward of the stock. Both these steam-ships made some very
rapid passages, the _City of Paris_ in May 1889 bringing down the time
of the transatlantic journey to less than six days. These were the
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account