Dolomite is abundant in the Llano uplift area of central
Texas—particularly in the Cambrian and Ordovician rocks. A number of
these central Texas dolomites have been quarried for use as building
stones. Some of them also have been crushed and used as a road-building
material and as a stone aggregate that is mixed with cement to make
concrete. This dolomite is also used as terrazzo chips (terrazzo floors
are described with serpentine on p. 88). In addition, Ellenburger
(Ordovician) dolomite from Burnet County was used during World War II as
a source of the lightweight metal magnesium.
Dravite. _See_ Tourmaline.
Feldspar
Feldspar is the name given to a group of nonmetallic minerals that are
much alike. Several of them are so similar that a petrographic
microscope must be used to tell them apart. Each of the feldspar
minerals is an aluminum silicate. Each of them contains, in addition, at
least one of the following elements: potassium, sodium, calcium, and
barium. The feldspar minerals that are found in Texas include _albite_,
a sodium-aluminum silicate, and _orthoclase_ and _microcline_, which are
both potassium-aluminum silicates.
The feldspar minerals are transparent to translucent and have either
glassy or pearly lusters. They can be white, cream, or a shade of red,
brown, yellow, blue, gray, or green. When you rub a feldspar across a
streak plate, it leaves a white streak. The feldspars are rather hard—a
pocket knife will not scratch them, although a piece of quartz or a
steel file will. These minerals have good cleavage in two directions.
The cleavages meet at an angle of about 90°, so that the cleavage
fragments have square corners.
[Illustration: Feldspar cleavage fragment from Llano County, Texas. The
two directions of good cleavage meet at an angle of about 90°.]
The feldspars are important rock-forming minerals. You can find them in
igneous rocks, such as granite or pegmatite, and in metamorphic rocks,
such as gneiss. They also occur as fragments in sedimentary rocks, such
as some sandstone and conglomerate.
Although the feldspars can originate in other ways, they form mostly
from hot magmas that cool and crystallize into igneous rocks. These
minerals occur in the rocks as grains, as cleavable masses, and as
individual crystals. The crystals may be shaped like prisms, or they may
be flat and slabby.
Good places to look for feldspars are in areas where granites,
pegmatites, and other intrusive igneous rocks appear at the surface. The
pegmatite rocks of Burnet, Gillespie, Llano, and Mason counties in the
Llano uplift area of central Texas, and those of the Van Horn Mountains
in Hudspeth and Culberson counties in west Texas, are especially good
sources of feldspar. Large cleavable masses and crystals that are more
than a foot long are found in some of these rocks.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account