The Art and Practice of HawkingMichell, E. B. (Edward Blair)
History
The Art and Practice of Hawking
Michell, E. B. (Edward Blair)
Falconry
Before the intending falconer takes any preliminary steps even towards
becoming the owner of a hawk, he must make himself thoroughly familiar
with the necessary appliances which he will have to use, and first of
all with the hawk's furniture, or articles of attire and daily use.
The "jess" (or jesse) by which the hawk's feet are secured is a strip
of leather fastened round the leg, just above the foot. It is, of
course, of a different length, width, and stoutness, according to the
size of the wearer. For a peregrine or ger the same stuff may be used
as for strong riding or driving gloves; and the softer and more pliable
it can be, consistently with strength, the better. For a gerfalcon 8
in. is not too long. For a peregrine tiercel 6-1/2 in. is long enough,
and for hawks of intermediate size the length may vary according to
their proportions. In the case of the smaller hawks, from the female
sparrow-hawk to the tiny jack-merlin, the length for ordinary purposes
should be from 4-1/2 in. to 6-1/2 in. But when a jack-merlin is flying
ringing larks late in the season, or indeed at any time, and it is
important that he should carry the very smallest possible amount of
extra luggage, his jesses may be made out of a thin kid glove, well
stretched and greased, and need not be more than 3-1/2 in. long, by
1/4 in. wide, bulging out to 1/3 in. at the place where they encircle
the leg, and at the other end, where they are hooked to the swivel. In
all cases the jess is attached in the same way. After it has been well
stretched and greased, a short slit is made near the broader end of the
leather (see Fig. 1), and another a little farther down. The distance
between the two slits should be about the same as the circumference of
the hawk's leg--not greater, nor much less. This part of the leather
between the two slits is applied to the hawk's leg, and the shorter
end, being brought round the leg, is pushed through the second slit as
far as it will go. Then the longer end is in its turn passed through
the first slit and pulled tight. Some falconers pass the long end of
the jess through both slits before pulling it tight; but the reason for
this extra precaution has never been made plain. After the long end has
been pulled through--or before, if preferred--a hole is punched in the
leather at a short distance from the tip, and another and larger slit
is made for the purpose of attaching the jess to the swivel. But if the
hawk is destined, immediately after the jesses have been put on, to be
turned out to hack, this end slit is not required, and should never
be made, as it is possible that it might loop itself round some thorn
or other peg-like object, and hang up the hawk, causing her death or
some irreparable injury. Whenever a jess is released from the swivel,
it is a good plan, when there is time, to twirl up the end, rolling it
between the finger and thumb, so that the slit does not form a loop.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account