The Bark Canoes and Skin Boats of North AmericaChapelle, Howard Irving
History
The Bark Canoes and Skin Boats of North America
Chapelle, Howard Irving
Canoes and canoeing -- North America; Indians of North America -- Boats; Skin boats -- North America
The number of men required to man a fur-trade canoe varied with the use
required of the canoe, with its load, and its size. There were rare
occasions in which a _maître canot_ had 17 paddlers and a steersman,
but normally such a canoe was manned by between 7 and 15 men, depending
upon how much space aboard was required by cargo or passengers and
upon the difficulties of the route. An express canoe, traveling light
and at high speed, was manned by 4 to 6 paddlers, one of whom acted as
steersman or stern paddler, and one as the equally important bowman in
river work.
The most valuable information on the construction methods of fur trade
canoes was obtained in 1925 from the late L. A. Christopherson, a
retired Hudson's Bay Company official. He had joined the Company in
1874 and retired in 1919, after 45 years service, 38 of which he had
spent in western Quebec at the posts on Lake Barrière and on Grand
Victoria. These were canoe-building posts, and Christopherson had
supervised the construction of both the 5-and 4½-fathom trade canoes.
His posts had built the nearly vertical-ended _nadowé chiman_, the
Iroquois, or Ottawa River, type of Algonkin canoe. The actual building
was done by Indians, but the work was directed by the Company men.
[Illustration: Figure 138
FUR-TRADE CANOE BRIGADE, CHRISTOPHERSON'S HUDSON'S BAY COMPANY POST,
about 1885. Christopherson in white shirt and flat cap, sitting with
hands clasped. Five-fathom canoes, Ottawa River type.]
In the building the eye and judgment of the builder were the only
guides, aided by the occasional use of a measuring stick, and
Christopherson made it abundantly clear that the Company had no
rules or regulations that he knew of, regarding the size, model, and
construction of the canoes, nor any standards for decoration. The model
and appearance of the canoes were determined by the preferences of
the builders and the size by the needs of the posts. For example, the
5-fathom canoe had been built at the Grand Victoria post until it was
decided there that a 4½-fathom canoe would serve. The decoration, if
any, was apparently according to "the custom of the post."
The method of construction described by Christopherson seems to be
largely that of the Algonkin, modified slightly by Ojibway practices.
The canoes were built on a plank building bed made of 2-or 2½-inch
thick spruce; its middle was higher than the ends, as were the earthen
beds used in the east, and holes were bored in it to take the stakes.
A stake was placed near the end of each thwart and one between, along
the sides of the canoe. The individual builders had their preferences
as to the method of setting stakes; some set them vertically while
others bored the bed so that the stakes stood with their heads pointed
outward. A post might have two or more building beds, one for each
size, or model.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account