The oil which has been extracted by this process is put into large tanks where it is clarified and is then ready for the paint-maker. This oil is often referred to as “Vegetable Oil” and it has one very peculiar and very important characteristic which makes it useful and necessary for use in paint. This property is that of drying or becoming solid, losing all tendency to stickiness after it has been spread out thinly and exposed to the air for a short time. [Illustration: WHERE LEAD IS GROUND IN OIL.] [Illustration: WHERE PAINTS ARE MIXED.] Now that we have given attention to the preparation of the most important things used in the making of our can of paint, let us look a little to the manner in which they are put together, and the result. The oil is necessary in making paint in order to make it fluid, so that the paint may be brushed on to the wood or other surface, and also so that the pigment or powdered material which has been put into the paint will have something to hold it to the surface. The oil or other liquid which may be used is usually called “Binder” by the paint man because it binds the pigment in the paint and to the surface on which it has been spread or applied. In a large paint factory, the two white pigments, lead and zinc, are mixed with linseed oil in large machines known as “Mixers” into a smooth paste which is then run through other machines called “Mills,” where the paste is ground very fine into large tubes where the paint is finished by mixing in enough more oil to make it of the proper thickness or consistency for brushing. In this state it can be used, but would not be entirely satisfactory because it would dry very slowly. For that reason, the paint-maker adds in a small amount of what is known as “Drier,” which causes the paint to dry much more rapidly after it is spread out on any surface. The paint-maker may also add in a small amount of thin liquid called “Turpentine,” which also aids in the drying and the working of the paint. Turpentine is a very thin liquid which looks like water, and it is derived from the sap of one species of pine which grows abundantly in the southern portion of the United States. The sap is taken from the tree by tapping the tree or making an incision called a box, at certain seasons. After the sap is collected it is put through a heating process called “distilling,” which separates the water-white liquid, called turpentine, leaving a large mass of heavy material which is commonly known as “Rosin.” This turpentine is very useful to the paint-maker and the painter. It is also used for many other purposes. ~WHAT MAKES THE DIFFERENT COLORS OF PAINT~ The paint which we have described is the most simple kind and is white. There are many other kinds of paint used, being of many different colors. All of these different kinds require different treatment and preparation and would require many large books to explain even in a brief way.