The safety lamp is dangerous when there is a hole in the gauze that will permit the passage of flame to the outside, or when the gauze is dirty, so that any particular spot may be overheated, or when the velocity of the air is so great that the flame is blown through the gauze, or (generally) when in the hands of an inexperienced person. The unbonneted Davy lamp is not safe where the velocity of the air exceeds 360 feet per minute. The velocity with which the air strikes a lamp carried against it is increased by the amount equal to the rate at which the fireboss travels. If he walks at the rate of, say, 4 miles an hour or 352 feet a minute (on the gangways he will usually have to move faster than this to make his rounds on time) he will create by his own motion (and in still air) a velocity practically the same as that at which the unbonneted Davy is considered unsafe. [Illustration: Open oil lamp commonly worn on hat. Wick is inverted in spout.] [Illustration: Acetylene or carbide lamp for cap or hand.] History of the Safety Lamp. The safety lamp, the miner’s faithful and indispensable companion at his dangerous work, has been, heretofore, considered as the invention of the famous English scientist, Humphrey Davy, though the name of George Stephenson, of locomotive fame, has also been mentioned in this connection. Both came out with their inventions about the same time, but neither of them is the real inventor of the safety lamp; for there was, as proven by Wilhelm Nieman, a safety lamp in existence two years before Davy’s invention became known. It was not inferior to the latter, but rather surpassed it in illuminating power. Previous to this, all the precaution employed for the prevention of the threatening dangers of firedamp had been quite incomplete. One tried to thoroughly ventilate the mines by fastening a burning torch to a large pole, which was pushed ahead and exploded the gases. This was extremely dangerous work which, in the Middle Ages, was generally done by a criminal, in order that he might atone for his crimes, or by a penitent for the benefit of mankind. The attempt to substitute for the open light phosphorescent substances, encased in glass, was not much of a success. An improvement was the so-called steel mill, invented about 1750 by Carlyle Spedding, manager of a mine. This steel mill consisted of a steel wheel which was put into rapid motion by means of a crank. By pressing a firestone against the fast revolving wheel, an incessant shower of sparks was produced giving a fairly good and absolutely safe illumination. However, the running expenses of his apparatus, which necessitated the continual services of one man, were very high; for instance, the expenditure for light in a coal mine near Newcastle in the year 1816 amounted to about $200 per week. Nevertheless, the steel mill was very much appreciated and in use for a long time, only to be slowly supplanted by the safety lamp.