The Boot and Shoe Manufacturers' Assistant and Guide.: Containing a Brief History of the Trade. History of India-rubber and Gutta-percha, and Their Application to the Manufacture of Boots and Shoes. Full Instructions in the Art, With Diagrams and Scales, Etc., Etc. Vulcanization and Sulphurization, English and American Patents. With an Elaborate Treatise on Tanning.
History
The Boot and Shoe Manufacturers' Assistant and Guide.: Containing a Brief History of the Trade. History of India-rubber and Gutta-percha, and Their Application to the Manufacture of Boots and Shoes. Full Instructions in the Art, With Diagrams and Scales, Etc., Etc. Vulcanization and Sulphurization, English and American Patents. With an Elaborate Treatise on Tanning.
Footwear industry; Gutta-percha; Rubber; Tanning
Take three ounces shellac, one ounce sandarach, reduce them to a coarse
powder, add one half ounce of lampblack, place them in a glass vessel,
into which pour a pint and a half of the best alcohol; cork tight, and
frequently shake the vessel to hasten solution. This varnish will retain
its brilliancy for years. It may be spread with a sponge or brush. When
it is used for upper leather add half a pint of alcohol and one ounce of
turpentine or an ounce of gummastic.
By adding a small portion of sandarach varnish to the common sponge
blacking it will make it brilliant and hard. By adding a small portion
India-rubber dissolved in triple refined camphene it renders the
blacking elastic and water-proof, and useful for boot and shoe uppers,
etc.
_Asphaltum_ is a smooth, hard, brittle, black substance, which breaks
with a polish, melts easily when heated, and, when pure, burns without
leaving any ashes. It makes a cheap and brilliant varnish for boot and
shoe heels, by dissolving it in triple refined camphene. It should be
made thick so as to spread with the finger or a brush.
_India-rubber_ has been highly extolled for a varnish. Dissolve in five
times its weight of triple refined camphene. By keeping it a few days,
after it is cut fine, then boil one ounce of this solution in eight
ounces of “drying” linseed oil, for a few minutes; strain the solution
and use it warm.
WATER-PROOF CEMENT.
Take of the best glue four ounces, of isinglass two ounces, and dissolve
them in mild ale over a slow fire, in a common glue kettle, to the
consistence of strong glue, when one ounce and a half of well boiled
linseed oil must be gradually added, and the whole be well mixed by
stirring. When cold and made into cakes, it resembles India-rubber. When
wanted for use dissolve a piece of it in a proportionate quantity of
ale. This cement is applicable to all joints of wood, to join
earthen-ware, china, glass. It is an excellent cement for leather, for
harness, bands for machinery, &c. The joints of these are to be prepared
as if for sewing, the cement to be applied _hot_, laying a weight upon
each joint as it is made, in which state it is to be left six hours,
when the joints will be found nearly as firm as if they were of an
entire piece. By adding a little tow to the above, you have an excellent
cement for leaks in casks, &c.
SEED-LAC VARNISH.
Take three ounces of seed-lac, and put it, with a pint of spirits of
wine, into a bottle, of which it will not fill more than two-thirds.
Shake the mixture well together, and place it in a gentle heat, till the
seed-lac appears to be dissolved: the solution will be hastened by
shaking the bottle occasionally. After it has stood some time, pour off
the clear part, and keep it for use in a well-stopped bottle. The
seed-lac should be purified before it is used, by washing it in cold
water, and it should be in coarse powder, when added to the spirit.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account