Illustration: GUN-MOULD. Illustration: GUN-BORING MACHINE. “Ordnance,” or great guns are made of cast-iron or of gun-metal (a mixture of copper and tin), but experiments have lately been made with wrought-iron and cast-steel, with the view of obtaining a tougher and more durable material. They are cast solid, and afterwards bored with a machine. The following account of gun-casting at Woolwich Arsenal appeared in the “Times” of January 22, 1858:--“As the plug was drawn the glowing mass leapt out like a stream of silver, filling up the moulds for two twelve-pounder howitzers that were to be cast, and leaving a bright, hungry-looking flame playing over them, making everything red-hot which it approached. In this workshop about twenty men and boys produce twelve brass guns per week, as well as tangent-scales for ships’ guns, lock-covers, brass fittings for machinery, &c., and iron castings. Each gun cast requires two days to cool, when it is removed to the turnery to be bored; and it was to this workshop that the royal party next proceeded, and saw the guns in all their stages of trimming, finishing, and boring. Three-quarters of an hour suffice to cut a gun to its proper length and remove the rough sand which adheres to it after casting. It is then turned over to another man and another machine, and the whole of its outside shaping and marking is completely finished in two days, when it is again turned over to a fresh machine, and bored and drilled ready for service in a day-and-a-half more. With the present machinery the turnery at Woolwich could finish thirty brass guns in a week, though at this time it never completes more than ten or twelve.” Illustration: FIG. 6. (‡ FIELD GUN).