The films are coated with the sensitive emulsion in two degrees. The negative films must be as sensitive as possible to light, as they are intended to receive the shortest possible exposure, while the positive films, or the ones which correspond to the print paper in still photography, are made less sensitive to light, inasmuch as they are exposed for a longer time in the printing machine. Fireproof films are probably one of the most important developments in the whole great motion-picture industry, for through these, schools, colleges, churches, lecture halls, and other public places not fitted with the fireproof box in which the motion-picture operator works, can have the advantage of cinematography. It was a difficult matter to find a non-inflammable film, for science has not yet discovered a base that can be made without cellulose, but the base we know to-day was treated so as to be non-explosive and practically non-inflammable. This film base is called cellulose-acetate, and when it is exposed to an excessive heat, as, for instance, the beam of the motion-picture lamp when the film is not moving, or when it touches a flame, it melts but does not blaze up. In the melting it gives off a heavy smoke, but there is no serious danger from this, as there is from the spurting flames from an exploding cellulose-nitrate base. The films are packed in metal airtight and lightproof boxes and sent to the motion-picture firms, where they begin a complicated and an interesting career. The first stage is the perforating machine, through which all films, whether negative or positive, must go. The holes are made along the two edges of the celluloid strips, just as shown in the picture opposite page 176. There are sixty-four holes to the foot, on each side of the film, and each hole is oblong-shaped, as can be seen, with a width of about one eighth of an inch and a depth of about one sixteenth of an inch. This is known as the Edison Standard Gauge, and it is observed by practically all the motion-picture firms in the world. The perforations along the edges of the films furnish the means for drawing them through the camera, printing machine, and projector; and as the correct movement of the films is one of the important factors in making good pictures, they must be absolutely mathematically exact. A fault in perforation of even as much as one thousandth part of an inch is apt to cause the film to buckle in the camera or projector and ruin the whole thing.