Five or six thousands of these lengths are made into a bundle kept together by a ring of steel at each end. They are then heated to redness in a furnace, and afterwards laid upon a flat iron plate, and rubbed backwards and forwards with a steel bar until each wire is perfectly straight. The next stage is to grind a point at each end of the wire. This is done by the aid of grindstones about eighteen inches in diameter and four inches thick; they are made to revolve so rapidly that they are liable to fly into pieces, and are therefore partially enclosed in iron plates to avoid injury to the grinder, should such an accident occur. The grinder takes from fifty to sixty wires between the thumb and forefinger of his right hand; and as he presses them against the stone, he causes all the wires to roll round, and thus each is ground to a point. So expert do the grinders become by practice, that they point a handful of these wires, usually about sixty, in half a minute, or about seven thousand in an hour. During the grinding every wire gives out a stream of sparks, and these together form a bright glare of light. [Illustration: Rubbing.] Pointing these wires is the most unhealthy part of the manufacture; the fine dust is carried into the lungs of the workmen, and destroys them in a few years, very few living beyond the age of forty. Wet grindstones cannot be used, as the points of the needles would be rapidly rusted. [Illustration: Drill for making the Eyes. Smooth File for rubbing. Hammer. Cullender. Packet of Needles. Flat File.] The wires thus pointed at each end are stamped by a heavy hammer, raised by a lever moved by the workman’s foot. The under surface of this hammer is so formed, that when it falls on the wire midway between the two ends it stamps on one side the gutters, or grooves, in which the eye is afterwards made; and the anvil on which the wire rests when the hammer strikes it forms the two grooves on the opposite side. This stamping also makes a slight depression or pit on each side at the spot intended for the eye. The wires are then passed to a boy, who takes a number of them in his left hand, whilst with his right he works a press, moving two hard steel points or piercers. These come down upon the wire as it is placed beneath them, and pierce the eyes for the two needles. Each wire now resembles two rough unpolished needles united together by their heads; and as it would require much trouble to divide them separately into two needles, a number are threaded upon two very thin wires, and are separated by filing and bending. [Illustration: Hand Press for piercing the Eyes. Stamping.]