"The term _cloisonné_ comes from the French word _cloison_, which means a _field_ or _enclosure_, and you will see as you go on how appropriate it is to this kind of work. If you examine the bowl which you will find in the box, you will see that it has a groundwork of light blue, and that on this groundwork there are fine threads of brass enclosing little squares and other figures in colors quite different from the body of the bowl. If you look at the cover, you will find that these squares and figures are repeated, and also that there are three circles, like plates with serrated edges, that seem to be lying on the top of the cover. These plates, or circles, have pictures of flowers on them, and the designs of the flowers on each one are different from those of the other two. Every leaf and petal is distinct from the others by means of the brass wires, and the colors do not at any time run together. [Illustration: COVER OF JAPANESE BOWL.] "In the first place, the bowl of plain porcelain is ground, so that the enamel will stick closely, which it would not do if the surface were glazed. Then the artist makes a design, on paper, of the pattern he intends putting on the bowl. When his design is finished, he lays it on a flat surface, and takes little pieces of brass wire which has been passed between rollers so that it becomes flattened; these he bends with pincers, so that they take the shape of the figure he wants to represent. Thus he goes over his whole design until every part of the outline, every leaf, flower, and stem--in fact, every line of his drawing--is represented by a piece of wire bent to the exact shape. The wire then forms a series of partitions; each fragment of it is a cell, or _cloison_, intended to retain the enamel in place and keep the colors from spreading or mingling. That is the first step in the work. "The second step is to attach these flattened threads of wire by their edges to the bowl. This is done by means of a fusible glass, which is spread over the surface of the bowl in the form of paste; the bits of wire are carefully laid in their places in the paste, and the bowl is then baked just enough to harden the surface and make it retain the threads where they belong. Now comes the third step. "This consists of filling the little cells or enclosures with the proper enamel, and, to do this correctly, the original design must be carefully followed. The design is drawn in colors, and as the artist proceeds with his work he has the colors ready mixed in little cups that are ranged before him. These colors are like thick pastes of powdered glass mixed with the proper pigments, and one by one the cells of the surface are filled up. Then the groundwork is filled in the same way; and when all this is done, the bowl is put into the oven and submitted to a strong heat. [Illustration: CHINESE METAL VASE.]