«Separation of Cobalt and Nickel from the Other Members of the Zinc and Aluminium Groups.»—When the aluminium and zinc groups are precipitated together, by means of a mixture of ammonium sulphide, hydroxide and chloride, the precipitate, obtained from a solution containing, say, the chlorides of all the ions of the groups, would consist of the following compounds: ‹Aluminium Group›: Fe_{2}S_{3}, Al(OH)_{3}, Cr(OH)_{3}. ‹Zinc Group›: NiS, CoS, FeS, MnS,[385] ZnS. If such a precipitate is treated, in the cold, for a short time with quite dilute (1 to 1.2 molar) hydrochloric acid, all of the hydroxides and sulphides dissolve, excepting the greater part of the nickel and cobalt sulphides, ‹which dissolve very much more slowly than do the other compounds›. Advantage is taken of this fact, to separate these two elements from the remaining members of these groups, and if the treatment is carried out with care, the separation is usually satisfactory. In all cases, however, since it is a question of delayed solution only, at least traces, and sometimes considerably more than traces, of the sulphides of nickel and cobalt go into solution with the other compounds. No sacrifice of analytical accuracy is involved, if this possible loss is kept in mind and provision made for the later detection of these small quantities of nickel and cobalt. The question of the slow solution, or apparent lack of solubility, of nickel and cobalt sulphides in dilute hydrochloric acid has formed an interesting problem for investigation. While nickel and cobalt sulphides are precipitated by ammonium sulphide, these sulphides, in common with those of all the other members of the zinc group, are not precipitated by hydrogen sulphide in the presence of a small excess of hydrochloric acid.[386] We would have [p193] NiCl_{2} + ‹x› HCl + H_{2}S ⥃ NiS + (‹x› + 2) HCl