In the mean time, an ingenious French mechanic had taken up the subject, and proceeded to make a self-moving road engine worked by steam-power. It has been incidentally stated that a M. Pouillet was the first to make a locomotive machine,[13] but no particulars are given of the invention, which is more usually attributed to Nicholas Joseph Cugnot, a native of Void, in Lorraine, where he was born in 1729. Not much is known of Cugnot's early history beyond that he was an officer in the army, that he published several works on military science, and that on leaving the army he devoted himself to the invention of a steam-carriage to be run on common roads. It appears from documents collected by M. Morin that Cugnot constructed his first carriage at the Arsenal in 1769, at the cost of the Comte de Saxe, by whom he was patronized and liberally helped. It ran on three wheels, and was put in motion by an engine composed of two single-acting cylinders, the pistons of which acted alternately on the single front wheel. While this machine was in course of construction, a Swiss officer, named Planta, brought forward a similar project; but, on perceiving that Cugnot's carriage was superior to his own, he proceeded no farther with it. When Cugnot's carriage was ready, it was tried in the presence of the Duc de Choiseul, the Comte de Saxe, and other military officers. On being first set in motion, it ran against a stone wall which stood in its way, and threw it down. There was thus no doubt about its power, though there were many doubts about its manageableness. At length it was got out of the Arsenal and put upon the road, when it was found that, though only loaded with four persons, it could not travel faster than about two and a quarter miles an hour; and that, the size of the boiler not being sufficient, it would not continue at work for more than twelve or fifteen minutes, when it was necessary to wait until sufficient steam had been raised to enable it to proceed farther.