In this short statement, the reader is presented with the whole theory and operation of the Safety-lamp, which is nothing more than an apparatus by which the inflammable air, upon exploding in its interior, cannot pass out without being so far cooled, as to deprive it of the power of communicating inflammation to the surrounding atmosphere. The principle having been once discovered, it was easy to adopt and multiply practical applications of it. From the result of these researches, it became at once evident, that to light mines infested with fire-damp, with perfect security, it was only necessary to use an air-tight lantern, supplied with air from tubes of small diameter, through which explosions cannot pass, and with a chimney, on a similar principle, at the upper part, to carry off the foul air. A common lantern, to be adapted to the purpose, merely required to be made air-tight in the door and sides, and to be furnished with the chimney, and the system of safety apertures below and above the flame of the lamp. Such, in fact, was Davy's first Safety-lamp; and having afterwards varied the arrangement of the tubes in different ways, he at length exchanged them for canals, which consisted of close concentric hollow metallic cylinders of different diameter, so placed together as to form circular canals of the diameter of from one-twenty-fifth to one fortieth of an inch; and of an inch and seven-tenths in length; by which air is admitted in much larger quantities than by the small tubes, and they are moreover much superior to the latter in practical application. He also found, that longitudinal air-canals of metal might be employed with the same security as circular canals; and that a few pieces of tin plate, soldered together with wires to regulate the diameter of the canal, answered the purpose of the feeder or safe chimney, as well as drawn cylinders of brass. The subjoined explanatory sketches will assist in rendering the scheme intelligible, and obviate the possibility of any misconception of the subject. [Illustration] FIG. 1. represents the first Safe lantern, with its air-feeder and chimney furnished with safety metallic canals. The sides are of horn or glass, made air-tight by putty or cement. A. is the lamp through which the circular air-feeding canals pass. B. is the chimney containing four such canals; above it is a hollow cylinder, with a cap to prevent dust from passing into the chimney. C. is the hole for admitting oil. F. is the rim round the bottom of the lantern, to enable it to bear motion. [Illustration] FIG. 2. exhibits an enlarged view of the safety concentric canals, which, if one-twenty-fifth of an inch in diameter, must not be less than two inches in exterior circumference, and one-seventh of an inch high. [Illustration] FIG. 3. exhibits the longitudinal safety canals. [Illustration]