[Illustration: Figs. 38 and 39.] On the design fig. 34 we see a machine of more modern construction ready mounted. The receptacle parts of the same are arranged and connected in full agreement with the above mentioned except that the motion is effected by the driving power fitted to the machine on the ground on the left side. [Illustration: Fig. 40.] The principle of this roller machine has long been applied in the building of other types, and we find that these, variously altered, renovated and improved, are to-day an indispensable equipment in every chocolate factory. In the following pages we give a description of some of the best-known constructions of refiner. The so called battery rolling mills constitute a remarkable innovation. It is apparent that the more rollers a cylinder machine contains, and the greater their length and diameter, all the more efficacious will the working of the machine be. Batteries have accordingly been constructed, whereby two, three or more roller systems are combined, one to every three rollers, and rising one above the other, so that they slant upwards much as shown in Fig. 40. As the battery rolling mills possessed the disadvantages that they took up too much room and could not be well fed and regulated, they are generally replaced by rolling machines of from 6 to 9 rollers, first constructed by J. M. Lehmann. These rolling machines of 6 to 9 rollers which we see before us in Figs. 35 and 36 are really systems of 3 rollers fitted one over the other. They therefore take up the room of a 3-roller machine and are quite as easy to work. [Illustration: Fig. 41 a.] As will be seen from the design of a nine-roller apparatus, fig. 37, the chocolate mass descends from one roller system to the other, and is fine rolled in a third of the time otherwise required, and at one operation, with corresponding saving of labour. The nine roller apparatus are provided with landing stage and steps, and fed either by means of elevators, or from above. Fig. 38 shows a recent construction, three roller apparatus (case castings, cf. below) standing vertically, which accordingly takes up little room. The hopper is low-lying, whilst the discharging is effected from the upper roller, and accordingly admits of the occasional use of a somewhat larger size of transport trolley. This type also occurs with 6-9-12 rollers, as apparent from fig. 39. [Illustration: Fig. 41 b.]