The New York Subway, Its Construction and EquipmentInterborough Rapid Transit Company
History
The New York Subway, Its Construction and Equipment
Interborough Rapid Transit Company
Local transit -- New York (State) -- New York; Subways -- New York (State) -- New York
The precautions to secure safety from fire consists generally in the
perfected arrangement and installation of the electrical apparatus and
the wiring. For the lighting circuits a flexible steel conduit is
used, and a special junction box. On the side and upper roofs, over
these conduits for the lighting circuits, a strip of sheet iron is
securely nailed to the roof boards before the canvas is applied. The
wires under the floor are carried in ducts moulded into suitable forms
of asbestos compound. Special precautions have been taken with the
insulation of the wires, the specifications calling for, first, a
layer of paper, next, a layer of rubber, and then a layer of cotton
saturated with a weather-proof compound, and outside of this a layer
of asbestos. The hangers supporting the rheostats under the car body
are insulated with wooden blocks, treated by a special process, being
dried out in an oven and then soaked in an insulating compound, and
covered with 1/4-inch "transite" board. The rheostat boxes themselves
are also insulated from the angle iron supporting them. Where the
wires pass through the flooring they are hermetically sealed to
prevent the admission of dust and dirt.
At the forward end of what is known as the No. 1 end of the car all
the wires are carried to a slate switchboard in the motorman's cab.
This board is 44 x 27 inches, and is mounted directly back of the
motorman. The window space occupied by this board is ceiled up and the
space back of the panels is boxed in and provided with a door of steel
plate, forming a box, the cover, top, bottom, and sides of which are
lined with electrobestos 1/2-inch thick. All of the switches and
fuses, except the main trolley fuse and bus-line fuse, which are
encased and placed under the car, are carried on this switchboard.
Where the wires are carried through the floor or any partition, a
steel chute, lined with electrobestos, is used to protect the wires
against mechanical injury. It will be noted from the above that no
power wiring, switches, or fuses are placed in the car itself, all
such devices being outside in a special steel insulated compartment.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account