Botany; Geotropism; Plants -- Irritability and movements
Smithia Pfundii.—The stiff terminal shoots of this Leguminous
water-plant from Africa project so as to make a rectangle with the stem
below; but this occurs only when the plants are growing vigorously, for
when kept in a cool place, the summits of the stems become straight, as
they likewise did at the close of the growing season. The direction of
the rectangularly bent part is independent of the chief source of
light. But from observing the effects of placing plants in the dark, in
which case several shoots became in two or three days upright or nearly
upright, and when brought back into the light again became
rectangularly curved, we believe that the bending is in part due to
apheliotropism, apparently somewhat opposed by apogeotropism. On the
other hand, from observing the effects of tying a shoot downwards, so
that the rectangle faced upwards, we are led to believe that the
curvature is partly due to epinasty. As the rectangularly bent portion
of an upright stem grows older, the lower part straightens itself; and
this is effected through hyponasty. He who has read Sachs’ recent Essay
on the vertical
and inclined positions of the parts of plants[5] will see how difficult
a subject this is, and will feel no surprise at our expressing
ourselves doubtfully in this and other such cases.
[5] ‘Ueber Orthotrope und Plagiotrope Pflanzentheile;’ ‘Arbeiten des
Bot. Inst., in Würzburg,’ Heft ii. 1879, p. 226.
A plant, 20 inches in height, was secured to a stick close beneath the
curved summit, which formed rather less than a rectangle with the stem
below. The shoot pointed away from the observer; and a glass filament
pointing towards the vertical glass on which the tracing was made, was
fixed to the convex surface of the curved portion. Therefore the
descending lines in the figure represent the straightening of the
curved portion as it grew older. The tracing (Fig. 123, p. 274) was
begun at 9 A.M. on July 10th; the filament at first moved but little in
a zigzag line, but at 2 P.M. it began rising and continued to do so
till 9 P.M.; and this proves that the terminal portion was being more
bent downwards. After 9 P.M. on the 10th an opposite movement
commenced, and the curved portion began to straighten itself, and this
continued till 11.10 A.M. on the 12th, but was interrupted by some
small oscillations and zigzags, showing movement in different
directions. After 11.10 A.M. on the 12th this part of the stem, still
considerably curved, circumnutated in a conspicuous manner until nearly
3 P.M. on the 13th; but during all this time a downward movement of the
filament prevailed, caused by the continued straightening of the stem.
By the afternoon of the 13th, the summit, which had originally been
deflected more than a right angle from the perpendicular, had grown so
nearly straight that the tracing could no longer be continued on the
vertical glass. There can therefore be no doubt that the straightening
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account