Within a few years of the close of the century this placing of arc lamps in branches from the same mains which supply incandescent lamps became common, and the enclosure of the arc in a partially air-tight globe, a procedure advocated by Staite, in 1847, was revived by Howard, Marks, and others for saving carbons and attention to the lamp. The enclosed arc lamp was also found to be especially adapted to use in branches of the incandescent lamp circuits, which had in cities become greatly extended. The increasing employment of alternating currents in the distribution of electric energy has led also to the use of alternating current arc lamps, and special current-regulating apparatus is now being applied on a large scale to extended circuits of these lamps. It can be seen from these facts that the art is still rapidly progressing and the field ever widening. A little over twenty years ago practically no arc lamps were used. At the close of the century, they were numbered by hundreds of thousands. The annual consumption of carbons in this country has reached two hundred millions. Almost simultaneously with the beginning of the commercial work of arc lighting, Edison, in a successful effort to provide a small electric lamp for general distribution in place of gas, brought to public notice his carbon filament incandescent lamp. A considerable amount of progress had previously been made by various workers in attempting to reduce the volume of light in each lamp and increase the number of lights for a given power expended. Forms of incandescent arc lamps, or semi-incandescent lamps, were tried on a considerable scale abroad, but none have survived. So, also, many attempts to produce a lamp giving light by pure incandescence of solid conductors proved for the most part abortive. Edison himself worked for nearly two years on a lamp based upon the old idea of incandescent platinum strips or wires, but without success. The announcement of this lamp caused a heavy drop in gas shares, long before the problem was really solved by a masterly stroke in his carbon filament lamp. Curiously, the nearest approach to the carbon filament lamp had been made in 1845, by Starr, an American, who described in a British patent specification a lamp in which electric current passed through a thin strip of carbon kept it heated while surrounded by a glass bulb in which a vacuum was maintained. Starr had exhibited his lamps to Faraday, in England, and was preparing to construct dynamos to furnish electric current for them in place of batteries, but sudden death put an end to his labors. The specification describing his lamp is perhaps the earliest description of an incandescent lamp of any promise, and the subsequently recorded ideas of inventors up to the work of Edison seem now to be almost in the nature of retrograde movements. None of them were successful commercially. Starr, who was only twenty-five years of age, is reported to have died of overwork and worry in his