The Romance of War Inventions: A Description of Warships, Guns, Tanks, Rifles, Bombs, and Other Instruments and Munitions of Warfare, How They Were Invented & How They Are EmployedCorbin, Thomas W.
History
The Romance of War Inventions: A Description of Warships, Guns, Tanks, Rifles, Bombs, and Other Instruments and Munitions of Warfare, How They Were Invented & How They Are Employed
Corbin, Thomas W.
Inventions; Military art and science; Naval art and science
Probably all my readers know something of the induction or shocking
coil, wherein intermittent currents in one part of the coil induce
intermittent currents of a somewhat different kind in another part of
the coil. Few people realize, however, that the same effect can be
attained, within limits, in a single coil such as the winding upon the
magnet of an electric bell.
Watch a bell at work and you will notice a bright spark at the place
where the contact is made and broken. That spark is due to a sudden rush
of current which takes place in the coil when the original current is
stopped, in other words, when the contact is broken. It is as if the
coil gives a rather vicious "kick" every time the current is stopped.
There is not much electricity in this "kick" current, but it is very
forceful, and it is that force which makes it actually jump across the
gap after contact has been broken, thereby causing the spark.
Now we can capture most of that energy and make it go a long distance
through wire and through earth carrying our messages for us. To do this
we need to make a new connection on the bell at the place where the
spring is fixed. Then we can make two circuits. One is between the two
terminal screws of the buzzer, in which circuit we must include the
battery and the key. That circuit will be just as it would be if we were
fixing the buzzer to announce our visitors at the front door.
The second circuit is different: lead one wire from the new connection
just made and take it to a pin driven into the ground. If the ground is
just a shade moist a wire meat-skewer will answer admirably. Then lead a
second wire from that one of the two terminal screws which is connected
directly to the winding of the magnet (not to that one which is
connected to the contact screw) and lead it away to your distant
station.
At the other station connect the single wire to the telephone as before
and the other "end" of the telephone to a pin in the earth. You will
find that the "kicks" from the coil will traverse wire and earth-return
quite easily, while there will be no difficulty about working the bell,
for the small battery will do that quite well. In fact, after cutting
the hammer off and so converting a bell into a buzzer, I have got quite
good results with one-third of a pocket-lamp battery. The little flat
batteries so familiar to us all if divested of their outer covering will
be found to consist of three little dry cells any one of which is quite
capable of sending messages in the way described as far as any amateur
is likely to want to send.
To be able to send and receive at either end it is only necessary to
connect both telephones and both coils "in series." That is to say,
connect one end of the coil to the long wire and the other to one wire
of the telephone, the other wire of the telephone being connected to
earth. If this be done at both ends signals can be sent and received
both ways.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account