THE MULTIPLEX SLIDE RULE differs from the ordinary form of rule in the arrangement of the B scale. The right-hand section of this scale runs from left to right as ordinarily arranged, but the left-hand section runs in the reverse direction, and so furnishes a reciprocal scale. At the bottom of the groove, under the slide, there is a scale running from 1 to 1000, which is used in conjunction with the D scale, readings being referred thereto by a metal index on the end of the slide. By this means cubes, cube roots, etc., can be read off directly. Messrs. Eugene Dietzgen & Co., New York, are the makers. THE “LONG” SLIDE RULE has one scale in two sections along the upper and lower parts of the stock, as in the “Precision” rule. The scale on the slide is similarly divided, but the graduations run in the reverse direction, corresponding to an inverted slide. Hence the rules for multiplication and division are the reverse of those usually followed (page 30). On the back of the slide is a single scale 1–10, and a scale 1–1000, giving cubes of this single scale. By using the first in conjunction with the scales on the stock, squares may be read, while in conjunction with the cube scale, various expressions involving squares, cubes and their roots may be evaluated. HALL’S NAUTICAL SLIDE RULE consists of two slides fitting in grooves in the stock, and provided with eight scales, two on each slide, and one on each edge of each groove. While fulfilling the purposes of an ordinary slide rule, it is of especial service to the practical navigator in connection with such problems as the “reduction of an ex-meridian sight” and the “correction of chronometer sights for error in latitude.” The rule, which has many other applications of a similar character, is made by Mr. J. H. Steward, Strand, London. LONG-SCALE SLIDE RULES It has been shown that the degree of accuracy attainable in slide-rule calculations depends upon the length of scale employed. Considerations of general convenience, however, render simple straight-scale rules of more than 20 in. in length inadmissible, so that inventors of long-scale slide rules, in order to obtain a high degree of precision, combined with convenience in operation, have been compelled to modify the arrangement of scales usually employed. The principal methods adopted may be classed under three varieties: (1) The use of a long scale in sectional lengths, as in Hannyngton’s Extended Slide Rule and Thacher’s Calculating Instrument; (2) the employment of a long scale laid in spiral form upon a disc, as in Fearnley’s Universal Calculator and Schuerman’s Calculating Instrument; and (3) the adoption of a long scale wound helically upon a cylinder, of which Fuller’s and the “R.H.S.” Calculating Rules are examples.