The first and most important step is to fix upon the position of the sitter,—to select the best aspect of the face, and, what is of more importance than is generally supposed, to determine the best distance from the camera at which he should be placed. At a short distance certain parts of one face and figure which should be seen are concealed, and certain parts of other faces are concealed which should be seen. Prominent ears may be either hid or made less prominent by diminishing the distance, and if the sight of both ears is desirable the distance should be increased. Prominent features become less prominent by distance, and their influence in the picture is also diminished by the increased vision which distance gives of the round of the head. The outline of the face and head varies essentially with the distance, and hence it is of great importance to choose the best. A long and narrow face requires to be viewed at a different distance from one that is short and round. Articles of dress even may have a better or a worse appearance according to the distance at which we see them. Let us now suppose the proper distance to be _six feet_, and since it is impossible to give any rules for taking binocular portraits with large lenses we must assume a standard camera with a lens a quarter of an inch in diameter, as the only one which can give a correct picture as seen with one eye. If the portrait is wanted for a ring, a locket, or a binocular slide, its size is determined by its purpose, and the photographer must have a camera (which he has not) to produce these different pictures. His own camera will, no doubt, take a picture for a ring, a locket, or a binocular slide, but he does this by placing the sitter at different distances,—at a very great distance for the ring picture, at a considerable distance for the locket picture, and at a shorter distance for the binocular one; but none of these distances are the distance which has been selected as the proper one. With a single lens camera, however, he requires only several quarter-inch lenses of different focal lengths to obtain the portrait of the sitter when placed at the proper distance from the camera. In order to take binocular portraits for the stereoscope a binocular camera is required, having its lenses of such a focal length as to produce two equal pictures of the same object and of the proper size. Those in general use for the lenticular stereoscope vary from 2.1 inches to 2.3 in breadth, and from 2.5 inches to 2.8 in height, the distance between similar points in the two pictures varying from 2.30 inches to 2.57, according to the different distances of the foreground and the remotest object in the picture.