“At the place selected for the construction of a dam, the ground is usually firm and often stony, and when across the channel of a flowing stream, a hard rather than a soft bottom is preferred. Such places are necessarily unfavorable for the insertion of stakes in the ground, if such were, in fact, their practice in building dams. The theory upon which beaver-dams are constructed is perfectly simple, and involves no such necessity. Soft earth, intermixed with vegetable fibre, is used to form an embankment, with sticks, brush, and poles imbedded within these materials to bind them together, and to impart to them the requisite solidity to resist the effects both of pressure and of saturation. Small sticks and brush are used, in the first instance, with mud and earth and stones for down-weight. Consequently these dams are extremely rude at their commencement, and they do not attain their remarkably artistic appearance until after they have been raised to a considerable height, and have been maintained, by a system of annual repairs, for a number of years.”[12] There are two different kinds of beaver-dams, although they are both constructed on the same principle. One, the stick-dam, consists of interlaced stick and pole work below, with an embankment of earth raised with the same material upon the upper or water face. This is usually found in brooks or large streams with ill-defined banks. The other, the solid-bank dam, is not so common nor so interesting, and is usually found on those parts of the same stream where the banks are well defined, the channel deep, and the current uniform. In this kind the earth and mud entirely buries the sticks and poles, giving the whole a solid appearance. In the first kind the surplus water percolates through the dam along its entire length, while in the second it is discharged through a single opening in the crest formed for that purpose.