A leading block for the tow rope is placed on the deck by span or bolt a few feet in front of the brake. The safety key reel, if used, must be fixed in a convenient position on deck, that the man attending it can see how to control it; in a properly constructed vessel he would be in the pilot house. The safety key line leads through a small leading block on the ensign staff or some convenient point abaft the lead of the tow rope, 15 to 20 feet above the water. The leading block on the yard may be fitted with a lizard, if thought necessary. A sharp instrument should be kept by the brakes ready to sever the tow rope. In large men of war, arrangements are made for carrying a loaded torpedo and two buoys in a convenient position on each side of the vessel, in such a manner that the tow line can be bent, the exploding bolt screwed in, the levers adjusted, and the torpedoes and buoys dropped simultaneously when required. _Preparing the Torpedoes for Use._--The torpedoes, port and starboard, loaded and ballasted, having been hoisted out of the torpedo room, are placed on the deck on their own sides, with their heads forward under the leading block, and the buoys placed abaft them and strung together; the exploding bolts are now entered into the torpedoes, and forced down until their safety keys rest on the brass work, taking care that each safety key points in the direction of the eye through which its lanyard has to pass; the levers are now secured by their lanyards, as explained at pages 120 and 121. The eye at the end of the buoy rope is now rove through the large or small ring in the stern end of the torpedo. The tow rope having been previously rove through the leading block on the deck and on the yard, is rove through the thimble of the slings from forward aft, and bent, with a single or double sheet bend, to the eye of the buoy rope. The safety key line having been previously rove through the leading block on the ensign staff, and the lanyard on the safety key having been led through the eye of the handle, making a fair lead with the slit in the bolt, are bent together with a double sheet bend, and stopped to the eye of the handle by a split yarn of suitable strength, the yarn having been first secured to the line by a round turn outside the bend. The line should also be stopped with another split yarn round all parts of the slings close up to the thimble, having first made an overhand knot in the line at a distance a few inches longer than that between the eye bolt and the thimble.