When it is desired to launch either of the said torpedo boats, the door of its tube or cylinder is first opened by sending a current through the cable that controls the door, as above described. Then the current is sent through the boat's cable to start her propelling engines. The said boat will then emerge from the cylinder or tube and will rise to the surface, or as near the surface as may be desired, and may then be directed and controlled by the operator at the keyboard, as previously described. And one after another of the said torpedo boats may be thus launched and exploded, without giving to the enemy any clue to the point or position from which they are being sent. [Illustration: LAY'S LOCOMOTIVE TORPEDO. PLATE XL] _Launching the Torpedo from a Ship._--The method of launching the Lay torpedo boat from an ironclad or other large ship is shown at Fig. 130. The tubes or cylinders _S_ in which the torpedo boats _A_ are held are, in the apparatus shown at Fig. 130, closed at their inner ends by plates, or covers _S_^{1}, which are provided with suitable water-tight and insulating packing boxes _S_^{2} for the passage of the electric cables of the said torpedo boats, each cable being connected with the keyboard, which is placed in any convenient part of the ship, and at their outer ends the said tubes are furnished with strong and well-fitted slide valves, or sluice gates _S_^{3}, which are opened by screws, connected by gearing with a hand wheel, and shaft _S_^{4}, _S_^{5}, for the admission and exit of the said torpedo boats. Also these cylinders are provided with packing pieces at their sides, arranged to be pressed by screws or otherwise up to the sides of the torpedo boats in these cylinders, and thereby hold them firmly and immovably in rough weather.