The fatherhood of the very useful and elegant arts of electrotyping and electroplating is in dispute. Daniell, while perfecting his battery, noticed that a current of electricity would cause a deposit of copper. In 1831, Jacobi, of St. Petersburg, called attention to the fact that the copper deposited on his plates of copper by galvanic action could be removed in a perfect sheet, which presented in relief, and most accurately, every accidental indentation on the original plates. Following this up, he employed for his battery an engraved copper plate, caused the deposit to be formed upon it, removed the deposit, and found that the engraving was impressed on it in relief, and with sufficient firmness and sharpness to enable him to print from it. Jacobi called his discovery galvanoplasty in the publication of his observations in 1839. It was but a step from this discovery to the application of the electrotyping process to the art of printing. A mould of wax, plaster, or other suitable substance is made of an engraving or of a page of type. This mould is covered with powdered graphite (black lead) so as to make it a conductor of electricity. It is then inserted in a bath containing a solution of sulphate of copper. An electric current is passed through the bath, and the copper is deposited on the mould in sufficient quantity to give it a hard surface capable of offering greater resistance in printing than the types themselves, and also of producing a clearer impression. In electroplating, practically the same principle is employed. The bath is made to contain a solution of water, cyanide of potassium, and whatever metal—gold, silver, platinum, etc.—it is designed to precipitate on the article to be electroplated. The current is then passed through the bath, and the article—spoon, knife, fork, etc.—to be electroplated receives its coating of gold, silver, German silver, platinum, or whatever has been made the third agent in the bath. The various modern submarine devices for the destruction of ships, known as torpedoes, submarine mines, etc., depend upon electricity for their efficiency. It is the lighting or firing agent, and is carried to the torpedo or mine by means of stout wires or cables from some safe shore-point of observation.