The Scotts' practice with respect to paddle engines has been no less varied than that in the case of screw machinery, ranging as it does from the ponderous side-lever engine of past years to the stern-wheel engine of the shallow-draught steamers of the present day. Oscillating and diagonal engines, both compound and triple-expansion, are also within the experience of the Company, the three-stage expansion being the type now usually adopted. With respect to auxiliary machinery, the Scotts invariably fit a separate centrifugal pump for circulating the water through the condenser for all classes of engines, excepting only those for the ordinary tramp steamer. The air, bilge, and sanitary pumps are usually worked from the main engine by levers. The feed pumps are generally independent. Frequently, especially in yachts, all the pumps are entirely independent of the main engines. The Scotts in some cases make all auxiliary machinery for their own engines: such as centrifugal pumps, fans, feed-heaters, auxiliary condensers, duplex feed and ballast pumps, etc. [Illustration: Plate XXXVI. TYPICAL PROPELLING ENGINES.] Many varieties and types of boilers have been made. The old practice of having two or three rings in the length of the shell in ordinary cylindrical boilers has long since given place to one plate in the length. The boiler ends are seldom made in more than two plates; up to diameters of 11 ft. only one plate is used. The number of riveted seams is thereby reduced to a minimum, and the liability of the boiler to leak is minimised. The Scotts also have a system of forced draught for supplying either cold or heated air to the furnaces, which is fitted largely to their ships, and gives every satisfaction. Large installations of Belleville and Yarrow water-tube boilers for working under forced draught have also been made and fitted in H.M. ships, but they need no description here. A large installation for burning oil fuel has recently been completed and applied by the firm to the Babcock and Wilcox water-tube, and the cylindrical, boilers of H.M.S. _Argyll_. FOOTNOTES: [68] From _Lloyds' Register_ we classify, according to speed, the numbers of British and Foreign, and of Oversea and Channel, Steamers, of over 16 knots.