Dana, Richard Henry, 1815-1882; Sailors; Seafaring life; Voyages and travels
We continued at work in this manner until the lower hold was filled to
within four feet of the beams, when all hands were called aboard to
commence steeving. As this is a peculiar operation, it will require a
minute description.
Before stowing the hides, as I have said, the ballast is levelled off,
just above the keelson, and then loose dunnage placed upon it, on which
the hides rest. The greatest care is used in stowing, to make the ship
hold as many hides as possible. It is no mean art, and a man skilled
in it is an important character in California. Many a dispute have I
heard raging high between professed "beach-combers," as to whether the
hides should be stowed "shingling," or "back-to-back, and
flipper-to-flipper;" upon which point there was an entire and bitter
division of sentiment among the savans. We adopted each method at
different periods of the stowing, and parties ran high in the
forecastle, some siding with "old Bill" in favor of the former, and
others scouting him, and relying upon "English Bob" of the Ayacucho,
who had been eight years in California, and was willing to risk his
life and limb for the latter method. At length a compromise was
effected, and a middle course, of shifting the ends and backs at every
lay, was adopted, which worked well, and which, though they held it
inferior to their own, each party granted was better than that of the
other.
Having filled the ship up, in this way, to within four feet of her
beams, the process of steeving commenced, by which an hundred hides are
got into a place where one could not be forced by hand, and which
presses the hides to the utmost, sometimes starting the beams of the
ship, resembling in its effects the jack-screws which are used in
stowing cotton. Each morning we went ashore, and beat and brought off
as many hides as we could steeve in the course of the day, and, after
breakfast, went down into the hold, where we remained at work until
night. The whole length of the hold, from stem to stern, was floored
off level, and we began with raising a pile in the after part, hard
against the bulkhead of the run, and filling it up to the beams,
crowding in as many as we could by hand and pushing in with oars; when
a large "book" was made of from twenty-five to fifty hides, doubled at
the backs, and put into one another, like the leaves of a book. An
opening was then made between two hides in the pile, and the back of
the outside hide of the book inserted. Two long, heavy spars, called
steeves, made of the strongest wood, and sharpened off like a wedge at
one end, were placed with their wedge ends into the inside of the hide
which was the centre of the book, and to the other end of each, straps
were fitted, into which large tackles were hooked, composed each of two
huge purchase blocks, one hooked to the strap on the end of the steeve,
and the other into a dog, fastened into one of the beams, as far aft as
it could be got. When this was arranged, and the ways greased upon
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account