Yachting, Vol. 2Dufferin and Ava, Frederick Temple Blackwood, Marquis of
History
Yachting, Vol. 2
Dufferin and Ava, Frederick Temple Blackwood, Marquis of
Yacht racing; Yachting; Yachts
Each boat shall not carry more than three or less than two
persons during a race, all of whom shall be amateurs, and
shall be steered by either a member or a lady. And no money
shall be awarded to a boat for a walk-over, but she may fly
a flag therefor. Each boat shall carry on all proceedings of
the Water Wags, all her platforms, floorings, thwarts, and
stern sheets, also a pair of oars not less than 9 ft. long,
with spurs or rowlocks for same; also, either one solid cork
ring-shaped life-buoy, not less than 30 in. in external
diameter, and capable of floating for three hours 21 lbs. of
iron suspended therefrom, or two smaller ones of the same
material and shape, which shall each float for the same time
14 lbs. of iron; or they may substitute a cork life-belt
that will float 10 lbs. for three hours for each of the
small life-buoys, providing each life-belt is worn the
entire time the boat is afloat. Before taking a prize the
owner of the boat shall declare to the party awarding it
that the spirit of this rule has been carried out. And it
shall also be the duty of every other competitor to protest
against a boat without a life-buoy. The life-buoys shall
rest unattached to anything in the boat, with nothing over
or resting on them, so that they will immediately float out
in the event of a capsize.
All persons on board who cannot swim 100 yards are requested
to _wear_ life-jackets.
The following are the limitations of a 'Water Wag' 13-footer:
Length over all, 13 ft.; beam, 4 ft. 10 in.; depth and
lines, that of model A.
Centreboard to be of iron and pivoted at forward end of
casing. Length shall not exceed 4 ft. When hauled up flush
with top of casing, no portion shall project below keel.
Immersed surface below keel shall not exceed 2-1/2 sq. ft.
Thickness at any point shall not exceed 3/8 of an inch.
Keel outside garboard strake, inclusive of thickness of
keelband, if any, shall not exceed in depth 1-1/2 in.
Keelband of iron, brass, or copper, not to exceed in
thickness 1/4 in.
Stem and stern post.--Moulded depth of, to be clear of hood
by not less than 2 in.
Kedge not to exceed 15 lbs. No metal cable allowed. No
ballast of any description save water.
Mast not to exceed over all 13 ft., measured from top of
keel to truck, and not to be stepped above keel more than 3
in.
Fore and aft sails not to exceed 75 sq. ft. in area.
Spinnaker not to exceed 60 sq. ft. in area, and is only to
be used before the wind, and in no case as a jib.
A full-sized tracing of the builder's moulds can be obtained by
sending 2_s._ to the Society for Employment of Women 21 Kildare
Street, Dublin.
[Illustration: 'King's Fisher,' 1776.]
[Illustration: Commodore Thomas Taylor, of the Cumberland Fleet,
1780.]
CHAPTER IV
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account