A Manual of Historic Ornament: Treating upon the evolution, tradition, and development of architecture and other applied arts. Prepared for the use of students and craftsmenGlazier, Richard
History
A Manual of Historic Ornament: Treating upon the evolution, tradition, and development of architecture and other applied arts. Prepared for the use of students and craftsmen
Glazier, Richard
Decoration and ornament -- History; Decoration and ornament, Architectural -- History; Decorative arts -- History
The moulds for terra cotta are usually piece moulds, made of plaster of
Paris, which absorbs much of the moisture of the clay. Sheet clay about
two inches thick is used. This is carefully pressed into the mould and
supported by webs of clay of the same thickness. It is essential to the
clay to be uniform throughout, or the shrinkage would be unequal. It is
then placed upon a flue to dry from two to six hours, when the clay will
have contracted sufficiently to allow the mould to be taken off. It is
then dried for a further period and burnt in a kiln. For fine work, the
kiln is “muffled”--the “muffle” being a lining of bricks to keep the
clay from actual contact with fire and smoke. The dry, or semi-dry
process, is the pressing of clay-powder into metal moulds, which
obviates the excessive shrinkage of the wet process. Encaustic tiles are
made in this way, the ornament being run into the incised pattern with
“slip.” Many tiles are decorated in the same way as ordinary
earthenware, that is, painted and glazed.
Terra cotta was largely used by the nations of antiquity, especially by
the Assyrians, whose clay tablets or books throw so much light upon
Assyrian history. With the Greek, terra cotta was extensively used for
“antefixa,” and the many beautiful Tanagra figures now treasured in our
museums show the exquisite modelling by the Greeks, in such a material
as terra cotta.
[Illustration: TERRA COTTA BY ANDREA DELLA ROBBIA.]
This material was used by the Etruscans for their sarcophagi and
recumbent figures. The Pompeians tiled their roofs with terra cotta. It
was used for votive statues and offerings, and for lamps, some of which
were dipped in molten glass.
During the revival of art in Italy in the 15th and 16th centuries, terra
cotta was extensively used by the Della Robbia family. LUCA DELLA
ROBBIA, 1400-82, produced many beautiful terra cotta reliefs coated with
the white tin enamel and enriched with coloured enamels. Among his
numerous works were the following:--The marble _Cantoria_ in the
cathedral; five bas-reliefs in marble on the Campanile at Florence; his
two first terra cotta reliefs in the tympanans of the doorway, and the
doors of the sacristry of the cathedral at Florence (1443-46); with the
two kneeling angels holding candelabra; the splendid monument to
L’Evêque Federighi (1455) with its beautiful recumbent figure, in the
church of S. Trinità, Florence; and the many fine medallions enriched
with heraldic forms executed for the church of Or San Michele and the
palace Quarateri in Florence. Fine examples are the medallions with the
arms of King Renè D’Anjou, now in the South Kensington museum.
In Santa Croce at Florence, there are a series of medallions of the four
evangelists and the twelve apostles, and in the South Kensington museum
there are twelve medallions representing the months. Many splendid
examples of Luca della Robbia’s work are now treasured in the national
museums.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account