A Practical Manual of the Collodion Process, Giving in Detail a Method For Producing Positive and Negative Pictures on Glass and Paper. — John Shaqi
A Practical Manual of the Collodion Process, Giving in Detail a Method For Producing Positive and Negative Pictures on Glass and Paper.Humphrey, S. D. (Samuel Dwight)
Science
A Practical Manual of the Collodion Process, Giving in Detail a Method For Producing Positive and Negative Pictures on Glass and Paper.
Humphrey, S. D. (Samuel Dwight)
Ambrotype; Photography
Fig. 30 is known to the daguerreotype operator as a "gilding stand," and
is the one best adapted to the wants of operators on glass. It may be
so arranged as to give the surface of the glass a water-level; D D are
thumb-screws, by means of which, when properly regulated, the frame G may
hold glass perfectly level and a large quantity of solution may be poured
over the surface.
Printing Frames.
[Sidenote: PRINTING FRAMES.]
There are numerous methods and apparatus used for holding the negative
and the paper during exposure to the light. The following illustrations
represent a convenient and economical frame for this purpose.
[Illustration: Fig. 31.]
[Illustration: Fig. 32.]
Fig. 31 represents the front of the frame. The negative glass is held upon
it by springs attached by screws to the bottom half of the frame, A, so
that they can be turned on or off, to suit the different sizes of glass.
On the other end of the spring are wooden buttons, which are placed on
the edges of the glass negative, holding it in its place, and pressing it
firmly against the paper which is placed under it. This frame is made of
two pieces of inch board, which are connected by hinges, falling over
as seen in Fig. 32, B being the half that is movable. This movable half
is secured in position by means of a wooden button, attached to A on the
back and under B, as seen in Fig. 32. The separate pieces, A and B, are
bevelled where they connect, as seen by Fig. 31. D (in Fig. 32) is one of
the springs, which can be seen in Fig. 31.
The entire bed or face of the frame, A and B, should be covered with a
thick piece of satinet cloth, which may be pasted to the lower half, A,
and extended over the entire surface of A and B. This forms a pad for the
paper.
This printing frame can be easily made by any cabinet-maker or carpenter.
The springs may be of sheet iron or brass--either will be found
sufficiently stiff for the purpose. Every operator should be provided with
from four to ten frames: the saving of time will be found to amply repay
the expenditure necessary for a good supply.
[Illustration: Fig. 33.]
Another article called a pressure frame, is represented in the
accompanying figure. This is more expensive than the first, and is by some
considered preferable.
Another cheap, convenient and equally good arrangement for holding the
negative and paper, is to take three glasses--say one a full size, being
the one having the negative upon it; and then take two glasses, each just
half the size of the negative, and have a piece of _very thick heavy_
cloth cut the size of the negative glass, which can be put between it and
the two half glasses, and then they can be held together by means of the
common spring clothes pin. The advantage of the two glasses at the back
is, that one can be entirely removed while the picture is being examined,
and afterwards returned without, in the least, moving the impression.
Collodion Vial.--Color-Boxes.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account