A System of Instruction in the Practical Use of the Blowpipe: Being A Graduated Course Of Analysis For The Use Of Students And All Those Engaged In The Examination Of Metallic Combinations — John Shaqi
A System of Instruction in the Practical Use of the Blowpipe: Being A Graduated Course Of Analysis For The Use Of Students And All Those Engaged In The Examination Of Metallic CombinationsAnonymous
Science
A System of Instruction in the Practical Use of the Blowpipe: Being A Graduated Course Of Analysis For The Use Of Students And All Those Engaged In The Examination Of Metallic Combinations
Anonymous
Blowpipe
If the oxide of a metal is brought into the luminous portion of the
flame produced as above, so that the flame envelopes the substance
perfectly, the access of air is prevented. The partially consumed
gases have now a strong affinity for oxygen, under the influence of
the intense heat of that part of the flame. The substance is thus
deprived of a part, or the whole, of its oxygen, and becomes _reduced_
according to the strength of the affinity which the substance itself
has for oxygen. If the reduction of a substance is undertaken on
platinum, by fusion with a flux, and if the oxide is difficult to
reduce, the reduction will be completely effected only in the luminous
part of the flame. But if a substance be reduced on charcoal, the
reduction will take place in the blue part of the flame, as long as
the access of air is cut off; but it is the luminous part of the flame
which really possesses the greatest reducing power.
The following should be observed in order to procure a good reduction
flame:
The wick should not be too long, that it may make a smoke, nor
too short, otherwise the flame will be too small to produce a
heat strong enough for reduction.
The wick must be free from all loose threads, and from
charcoal.
The blast should be continued for a considerable time without
intermission, otherwise reduction cannot be effected.
For the purpose of acquiring practice, the student may fuse the oxide
of manganese with borax, upon a platinum wire, in the oxidation flame,
when a violet-red glass will be obtained; or if too much of the oxide
be used, a glass of a dark color and opaque will be obtained. By
submitting this glass to the reduction flame, it will become colorless
in correspondence to the perfection with which the flame is produced.
Or a piece of tin may be fused upon charcoal, and kept in that state
for a considerable time, while it presents the appearance of a bright
metal on the surface. This will require dexterity in the operator;
for, if the oxidation flame should chance to touch the bright metal
only for a moment, it is coated with an infusible oxide.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account