In the manufacture of powder, particular kinds of wood are selected for carbonization. These are generally, willow, hazle, maple, poplar, linden, buckthorn, or alder, or those which are tender and light, because, as they are less dense, and consequently more friable, they enflame and consume more rapidly: they are known in the arts by the name of _white wood_. When a less sudden effect is to be produced with the gunpowder, and the combustion prolonged, as in some sky-rockets, the charcoal of hard wood is to be preferred, such as the oak, beech, &c. When the wood is gathered, the bark is removed, and the wood exposed to the sun to dry: it is then cut into billets, and charred. The ashes, if any be formed, are to be carefully separated. In considering the use of charcoal, therefore, for the preparation of gunpowder, we are to direct our inquiries to the choice of wood for carbonization, and the best process for carbonizing it. All light woods, we remarked, as the linden, willow, poplar, &c. furnish the lightest coal, and on that account are preferred. It is remarked, that tender wood, besides making a light, friable, and porous coal, is more combustible than ordinary hard, and more compact wood, and the coal that it furnishes leaves less residue after combustion. Many experiments have been made with coal prepared from different kinds of wood, with a view of ascertaining the kind best adapted for the manufacture of gunpowder. M. Letort, at the powder mills of Essonne, in France, instituted a number of experiments of this kind. He made gunpowder with the coal of several kinds of wood, and compared its effects by a mortar eprouvette. The result was, that the powder made with the coal of poplar, was the strongest; and the other powder, made with the coal of the linden, willow, &c. was of the same quality throughout. As to the second inquiry, it is hardly necessary to repeat, that for the complete and thorough carbonization of the wood, to produce at the same time coal of a uniform quality, the process of charring in iron cylinders or close vessels, is to be preferred. The point to be attended to is, to bring the wood to a complete state of ignition, and consequently to disengage all the volatile or fluid parts. When the gas (carburetted hydrogen) ceases to appear, it is a criterion that the operation is finished. This gas, it is to be recollected, will come over even after the whole of the wood is completely ignited. The first volatile product is the pyroacetic acid. Some saturate the acid liquor with chalk, and decompose the acetate of lime with sulphate of soda, and separate the acetic acid from the acetate of soda by distillation with sulphuric acid. The acetic acid is then tolerably pure, and may be diluted for use.