A Text-Book of Horseshoeing, for Horseshoers and VeterinariansLungwitz, A. (Anton)
Science
A Text-Book of Horseshoeing, for Horseshoers and Veterinarians
Lungwitz, A. (Anton)
Horseshoeing
The holes must be punched fine and the nails be quite short and strong.
On each shoe a long tongue should be made on the inner edge near the
toe, and so directed that it can be turned upward and outward to
embrace the toe of the claw. A small clip raised on the outer toe of
each shoe will increase its stability. In some parts of Saxony the
shoes are so made that the tongue of each shoe begins in the rear
third of its inner edge and runs forward, upward, and outward, closely
embracing the wall of the toe. The smaller clip is drawn up on the
outer edge of the shoe close to the toe. These shoes are more difficult
to make, but when applied sit more firmly and remain fast longer than
all others. Machine-made ox shoes (Fig. 227) have no clip at the inner
toe, and are frequently pulled and lost. For this reason they are
inferior to hand-made shoes. An undivided shoe (the so-called “closed
claw-shoe”) is unsuitable for oxen, because it deprives both claws of
their natural, free movements. However, such a shoe is of advantage
for heavy draft over hard and very rough roads, because it lessens the
liability of the fetlock and coronary joints and the cleft of the claws
to strains.
[Illustration: FIG. 227.
Pair of machine-made ox shoes, viewed from the ground-surface and in
profile; _a_, toe-calk; _b_, heel-calks.]
Great difficulty is often encountered in holding the feet during the
operation of shoeing. It is necessary to fasten the head securely
against a tree, post, or wall. A front foot may be raised and held
by passing a slip-noose in the end of a rope or side-line around the
fetlock and carrying the line over the withers to the opposite side,
where it is held by an assistant. A hind limb may be controlled by
passing a round pole in front of the hock of the leg to be raised,
and, with a man at each end of the pole, carrying the limb backward
and upward, in which position it is held; or the limb may be bent and
controlled by tightening a twitch or tourniquet upon the leg just above
the hock (Fig. 228). Oxen that continue to resist may sometimes be
quieted by light blows of a short stick upon the base of the horns. In
parts of the country where many oxen are shod stocks are in common use.
[Illustration: FIG. 228. Hind foot raised by means of a round pole.]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account