The =first thoracic vertebra= is easily recognized by the following specific characters: The body is wide and flattened dorso-ventrally. In front it has a head like the cervical vertebræ, and behind a cavity somewhat deeper than any other thoracic vertebra. Two =costal facets= are found on either side, and a well-marked spine ventrally. The =arch= is large and strong, and has large notches. The =articular processes= are much larger than those of other thoracic vertebræ, and resemble a good deal those of the seventh cervical in form. The =transverse processes= are short and thick, and each has on its ventral aspect a large concave facet for articulation with the tubercle of the first rib. The spinous process is curved backward and tapers to a point. Its length is usually about three or four inches (ca. 8 to 10 cm.). It may be mistaken at first glance for the last cervical, but is promptly identified by the three costal facets on each side and the length of the spine. The =last thoracic vertebra= is distinguished by the absence of the posterior pair of costal facets, and the confluence of the anterior pair with those on the transverse processes. [Illustration: FIG. 14.—THIRD THORACIC VERTEBRÆ AND UPPER PART OF RIB OF HORSE, ANTERIOR VIEW. (After Schmaltz, Atlas d. Anat. d. Pferdes.) ] [Illustration: FIG. 15.—LOWER PART OF NINTH THORACIC VERTEBRA OF HORSE, POSTERIOR VIEW. (After Schmaltz, Atlas d. Anat. d. Pferdes.) ] The serial position of others may be determined at least approximately by the following data: (1) The bodies gradually diminish in length and width to the middle of the region and then increase slightly. Their costal facets become smaller and less concave from first to last. The ventral crest is distinct on three or four vertebræ at either end of the region. (2) The transverse processes diminish in size and are placed lower down as they are traced backward. Their costal facets become smaller and lower in position; on the last (and sometimes on its predecessor also) it fuses with the costal facet of the body. The upper non-articular part of the process gradually becomes more sharply defined, and in the last four or five separates to form the =mammillary process=. (3) The spinous processes increase in length to the third and fourth, and then gradually diminish to the fifteenth, beyond which they have about the same length. The backward inclination is most pronounced in the second, the sixteenth is vertical, and the last two are directed a little forward. The longest spines (_i. e._, those of the withers) are the thickest and have expanded summits which remain more or less cartilaginous; the others are more plate-like, and are surmounted by a thick lip. The second spine is more than twice as large as the first. The summits of the fourth and fifth usually form the highest point of the withers.