Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and PowerLeeds, F. H. (Frank Henley)
Science
Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and Power
Leeds, F. H. (Frank Henley)
Acetylene
selection between non-automatic and automatic apparatus may frequently be
made on the basis of capacity. A small plant is undoubtedly much more
convenient if automatic; a very large plant, such as that intended for a
public supply, is certainly better if non-automatic, but between these
two extremes choice may be exercised according to local conditions.
CONTROL OF THE CHEMICAL REACTION.--Coming now to study the principles
underlying the construction of an acetylene generator more closely it
will be seen that as acetylene is produced by bringing calcium carbide
into contact with water, the chemical reaction may be started either by
adding the carbide to the water, or by adding the water to the carbide.
Similarly, at least from the theoretical aspect, the reaction, may be
caused to stop by ceasing to add carbide to water, or by ceasing to add
water to carbide. Apparently if water is added by degrees to carbide,
until the carbide is exhausted, the carbide must always be in excess; and
manifestly, if carbide is added in small portions to water, the water
must always be in excess, which, as was argued in Chapter II., is
emphatically the more desirable position of affairs. But it in quite
simple to have carbide present in large excess of the water introduced
when the whole generator is contemplated, and yet to have the water
always in chemical excess in the desired manner; because to realise the
advantages of having water in excess, it is only necessary to subdivide
the total charge of carbide into a number of separate charges which are
each so small that more than sufficient water to decompose and flood one
of them is permitted to enter every time the feed mechanism comes into
play, or (in a non-automatic apparatus) every time the water-cock is
opened; so arranging the charges that each one is protected from the
water till its predecessor, or its predecessor, have been wholly
decomposed. Thus it is possible to regard either the carbide or the water
as the substance which has to be brought into contact with the other in
specified quantity. It is perhaps permissible to repeat that in the
construction of an automatic generator there is no advantage to be gained
from regulating the supply of both carbide and water, because just as the
mutual decomposition will begin immediately any quantity of the one meets
any quantity of the other, so the reaction will cease (except in one case
owing to "after-generation") directly the whole of that material which is
not in chemical excess has been consumed-quite independently of the
amount of the other material left unattacked. Being a liquid, and
possessing as such no definite shape or form of its own irrespective of
the vessel in which it is held, water is by far the more convenient of
the two substances to move about or to deliver in predetermined volume to
the decomposing chamber. A supply of water can be started instantaneously
or cut oil as promptly by the movement of a cock or valve of the usual
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account