The detailed method and time of soaking are determined mainly by the nature of the cure. One of the purposes of the soak liquors is to dissolve the salt used in curing hides and to rehydrate the hide and make it again soft and pliable. As a 10-per-cent. salt solution exerts a solvent effect on hide substance, it is necessary soon to change the first soak liquor of salted goods. Market hides, which are uncured, require the least soaking, the cleansing effect being most needed. The hides are inserted into pits ("water dykes") of water for a few hours, and the water changed once or twice. The soaking should not be prolonged as the hides are so putrescible, and where it is customary to leave the goods in a soak liquor overnight, it is advantageous to add a little slaked lime to the water before inserting the goods. This not only softens hard water, but is mildly antiseptic and plumping, and forms a suitable introduction to the liming proper. Each pit contains a "pack" of 30-50 hides, according to its capacity, which varies in different tanneries from 1000 to 2000 gallons. Tainted goods, which are indicated by a characteristic white colour on the flesh side and by loose hair, need a preliminary washing either in a "drum," "tumbler" or in a "paddle." This ensures a rapid change of liquor and the removal of most of the putrefactive agencies. Bad cases may need the application of antiseptics, such as immersion in 0.1 per cent. carbolic acid; but if possible these should be avoided, as they lengthen the time required for liming. After drumming or paddling, tainted goods should be placed directly into a lime liquor. Salted hides need very similar treatment to uncured hides, but the soaking is longer, because of the dehydration caused by salting. Hence they receive also a greater number of changes of water, three or four usually, but often more. As much loose salt as possible should be shaken from the hides before insertion into any liquor. The employment of drum or paddle before pit soaking is extremely useful to effect the rapid removal of superficial salt, and is also useful after pit soaking to remove the last traces.