=Physical Space= Several areas in the underground Control Building are available to experimenters. These include the trailer tunnel with room for two full-sized trailers, the data acquisition room, and the instrument shop. All of these areas are provided with conduits so that cables can be run directly to them from the Reactor Building. In the trailer tunnel the minimum cable length required to run to the core surface is about 30 feet. The exposure areas in the Reactor Building and the outdoor test site are equipped with conduits for communication and instrumentation cables. Available areas in the Laboratory Building include a high-bay set up area, a machine shop, laboratory space, fume hood with remote manipulator, photography laboratory, and offices. =Data Acquisition and Processing= The basic element here is the APRF Data Acquisition System described in Table IX. Various other instrumentation is available as summarized in Table IX. Data processing is available at the ARDC computer center and with on-line equipment at APRF. =Dosimetry= Routine dosimetry is performed by APRF personnel. Methods available include fluence and spectrum measurements using foil techniques, glass rod microdosimetry, thermoluminescence, and diverse active dosimeters. Foils are analyzed using the APRF Automatic Dosimetry System and data are available within a short time following exposure. Measurements are supplemented by analytical methods including one and two dimensional transport theory, Monte Carlo, and special foil analysis codes. =Staff= The APRF staff is available to guide, plan and set up experiments at the reactor, perform dosimetry, and assist in data acquisition. APRF participation is determined on a case-by-case basis. =Health Physics= Health physics survey, monitoring, decontamination and related services are available in conjunction with the BRL Health Physics Division. Table IX. APRF User Support Equipment -------------------------------------------------------------------- =Transient Data Recording System= -------------------------------------------------------------------- TAPE RECORDERS: _Three each—14 track Honeywell Model 7600_ FREQUENCY: _DC to 80 kHz FM, 400 Hz to 700 kHz Direct_ SIGNAL _Universal Strain gauge and thermocouple with_ CONDITIONING: _100 KC DC amplifiers_ TIME CODE: _IRIG A, 1 millisecond resolution_ PATCH PANELS: _Coaxial and triaxial connectors for all inputs_ _and outputs, insulated shields._ AUTO CALIBRATION: _50 channel, 3 step_ CHANNEL ID: _Automatic ID in binary code_ PLAYBACK: _12” oscillograph_ -------------------------------------------------------------------- =Dosimetry= -------------------------------------------------------------------- Basic Foil Calibration System 5000 Curie Co-60 source