Bombers' Training, and Application of Same in Trench WarfareFerris, J. R., Lieutenant
History
Bombers' Training, and Application of Same in Trench Warfare
Ferris, J. R., Lieutenant
Intrenchments
The rod is then gently lowered into the rifle, the clip sprung on the
muzzle and a blank cartridge inserted in the chamber.
The safety pin is withdrawn just before firing.
If, after the safety pin has been removed, the grenade is not used,
the safety pin may be replaced if the screwed ring has not unscrewed
and uncovered the two retaining bolts, but if these are uncovered the
grenade is in a dangerously sensitive condition, and if so found should
be destroyed. Only the special detonators and cartridges provided
should be used.
If by accident a grenade were fired with a bulleted round the rifle
would probably burst and injure firer.
This grenade is very safe to handle, as it cannot be fired by knocking
or dropping on the ground; it must travel through the air some distance
before the retaining bolts fall out.
=Pendulum Dial Sights.= A pendulum dial sight graduated in yards,
for direct aim or high elevation, is issued for use with the rifle
grenades, and can be easily affixed to the leaf of the back-sight.
Should the sight not fit tightly on the leaf, the spring sides should
be slightly pinched in.
=Grenade, Hand, No. 1, Mark 1. Description=: The grenade consists of a
brass cylinder encircled by a narrow cast-iron ring serrated to break
up into 16 fragments.
The cylinder is mounted on a wood block to which a cane handle, with
streamer, is attached.
The brass cylinder or body of the grenade is filled with explosive,
and has its upper end closed by the detonator holder, fixed by three
screws. This holder carries two pins for securing the detonator. The
body has fitted above the serrated ring two knobs and two indicating
stops.
The firing needle is carried in the removable cap, which has two
grooves formed on it in which slide the knobs on the body. The cap is
centrally pierced for the safety pin.
On the outer surface of the cap are stamped the words “Remove,”
“Travel” and “Fire.” When the knobs are in the groove “Remove,” as
indicated by the stops, the cap can be removed and replaced; the
central position, marked “Travel,” is to be adhered to normally; while
in the position “Fire” the cap, after removal of the safety pin, is
held in position by friction only, and can be pressed inwards to fire
the grenade.
The action of the grenade is simply that the cap is forced in on
impact, carrying the needle on to the detonator, the cap having been
turned into the position “Fire” and the safety pin having been removed
before the throwing.
=Packing=: The grenades are packed six in a wooden box. Cylinders
containing 10 detonators, No. 1 Hand Grenade, Marks I. or II., are
issued separately.
=Preparation=: The cap is removed, a detonator is inserted in the
recess, the grooves in the detonator being placed opposite the pins on
the body, and the detonator is then pressed home and turned to the left
(its flange being under the heads of the two pins) until the spring on
the detonator flange is released thus locking it in position.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account